Using Your Microwave Oven; Microwave Oven Controls - Whirlpool MH6600XM Use And Care Manual

Using your microwave oven
Microwave oven controls
There are four parts in the control section:
When you first plug in the oven, a tone sounds
-The Digital Display Clock, and Signal Lights
and the Display will be blank. If after you set the
- Command Pads
Clock [page 6) the Display becomes blank
- Number Pads
again, it means your electricity was off for a
- Cooktop Fan and Light Controls
while. Reset the Clock.
Instructions for each control are covered in
the following pages. Read
them carefully,
wave oven, it dis-
plays time settings,
signal lights and
shows you what
Number Pads you
touched.
While the oven is
running, a Signal
Light (or lights) will
be on to show what
the oven is doing.
Command pads
Touch Command
Pads to tell the
mlcrowave oven
what to do and In
what order A few
examples.
- CLOCK SET tells
the oven you are
going to set the
clock.
- START tells the
oven to start
See page 18 for
information on the
tone you hear when
touching any pad.
Each Command
Pad [except START
and CHANGE/
CANCEL] lights a
Signal Light on the
digital display.
5