Advertisement
I
I
4. To replace grease filters,
slide filter In the frame slot on
the front of the openlng.
Rush filter upward
and push
to the rear to lock into place.
8.
Slide a new charcoal
fflter
Into place. The filter should
rest at the angle
shown.
5. To replace charcoal
filter:
remove the vent cover
mounting
screws.
6.
Tip the cover forward, then
Ilft out to remove.
9. Slide the bottom of the
vent cover into place.
Rush the top until it snaps
into place.
Replace
the
mounting
screws.
10.
Turn the power
back on
at the main power supply
7. Llft the back of the
charcoal
filter. Slide the
filter straight out.
11.
DO not operate
the hood
without the filters In place.
20
Advertisement
