Advertisement
05-0091-7D0007-10/2019-BARTEC WerbeAgentur-435286
Maintenance and troubleshooting
WARNING!
Risk of injury due to incorrect procedure.
- Maintenance and troubleshooting work may
only be carried out by authorised, qualified
personnel.
Wartung
WARNING!
Serious accidents due to damaged components.
- Check control switches, position selector
switches, installation kit and cables regularly
for tears, damage and to ensure they are
mechanically secure.
The operating company must keep the switches, actuating
element and the installation kit in good condition, and must
operate them correctly, monitor them and clean them regularly.
NOTE
Do not use compressed air to clean dirty switches,
actuating elements and installation.
Troubleshooting
WARNING!
Serious accidents due to the use of non-original
spare parts.
- Only replace parts with original parts.
Installation kits are faulty if they indicate damage or if the
switch can no longer be guaranteed to remain firmly in place.
Faulty installation kits cannot be repaired. They must be
replaced in accordance with these Operating Instructions.
Disclaimer: We reserve the right to make technical changes. Changes, errors and printing
errors do not justify claims for damages.
Accessories, spare parts
Contact the service address for BARTEC GmbH for accessories
and spare parts.
Disposal
Comply with national regulations when disposing of metal
waste.
Service address
BARTEC GmbH
Max-Eyth-Str. 16
97980 Bad Mergentheim
Germany
Tel.: + 49 7931 597 0
Fax: +49 7931 597 119
5
Advertisement
