Manually Installing The Monitor Driver - Lenovo Qreator 27 User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7,
Microsoft Windows 10.
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your
4. From the Lenovo website http://support.lenovo.com/docs/Qreator_27,
5. Open the Display Properties window by clicking Start, Control Panel,
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver, then click Browse the computer to find the driver program.
12. Select Pick from the list of device driver program on the computer.
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
14. Select the "lenqreator 27.inf" file and click the Open button. Click the OK button.
15. In the new window, select LEN Qreator 27 and click Next.
16. After the installation is complete, delete all downloaded files and close all windows.
17. Restart the system. The system will automatically select the maximum
3-5 Qreator 27 Flat Panel Monitor User's Guide
computer to start the Windows 7 operating system.
find the corresponding monitor driver and download it to a PC
to which this monitor is connected (such as a desktop).
Hardware and Sound icon, and then click the Display icon.
following path:
X:\Monitor Drivers\Windows 7
(where X indicates "the folder in which the downloaded
driver is located"(such as a desktop)).
refresh rate and corresponding Color Matching Profiles.