Adjustment Of Gap Between Dot Head And Platen; Power Cord Connection - C.ITOH 1550S EP User Manual

2.6 Adjustment of Gap between Dot Head and Platen
The gap between the Print head and the platen is adjustable in 4 steps.
(a) When the gap adjusting lever is moved fully counterclockwise, the gap between the Print head
and the platen will be narrowed to the limit. The lever is usually set at this position when a
single sheet paper is used.
(b) To obtain high printing quality, move the gap adjusting lever to adjust the gap.
Platen
Print Head
Platen-to-head gap with gap
adjusting lever pushed fully
to rear.
'-----Gap 1
(Single paper)
Fig. 15 Gap Adjustment between Dot Head and Platen
2.7 Power Cord Connection
Connect the attached power cord to the printer, and insert the plug into the AC outlet.
-13-