Download Print this page

Warmup WMD 1 Installation Manuallines

Mirror demister

Advertisement

Quick Links

IMPORTANT
Read this manual before
attempting to install
your undertile heater.
Incorrect installation
could damage the heater
and will invalidate
your warranty.
IP57
Installation Guidelines:
Demister
The Warmup® Mirror Demister is designed to warm bathroom
mirrors, leaving them clear and free of condensation.
Four sizes of heaters are available - two rectangular versions
(450mm X 400mm and 600mm X 1100mm), a circular (600mm
diameter) and a squarish (290mm X 290mm); all 220-240 Volts.
The heaters are self adhesive, have an IP rating of 57 and are
SEMKO certified.
The mirror used in the application must be suitable for purpose
and the instructions provided by the mirror supplier must be
adhered to.
If at anytime the heater is damaged, please contact the Warmup
Technical Helpline on +44 20 8453 6868.
Model
Size
WMD 1
400mm X 450mm
WMD 2
600mm circular
WMD 3
290mm x 290mm
WMD 4
600mm X 1100mm
Mirror
Voltage
Amperage Resistance Wattage
230
230
230
230
0.30
850
0.24
960
0.12
1959
0.57
401
70
55
27
132

Advertisement

loading

Summary of Contents for Warmup WMD 1

  • Page 1 If at anytime the heater is damaged, please contact the Warmup Technical Helpline on +44 20 8453 6868. Model Size Voltage...
  • Page 2 The Warmup® demister must be mounted directly on to the reverse side of the mirror OR onto a surface which is in direct contact with the mirror. The demister is self -adhesive, NO other adhesives should be used.
  • Page 3 All work must be carried out in accordance with the IEE wiring regulations to BS7671 or national regulations. The Warmup® mirror demister must be connected to a lighting circuit, with a maximum 5 amp fuse of circuit breaker in the distribution board/consumer unit.
  • Page 4 5 amp switch. The installation must be in accordance with regulations. (Detailed instructions inside ) Register your product online at www.warmup.eu Warmup Plc 702 Tudor Estate, Abbey Road, London, NW10 7UW T. +44 20 8453 6868 F. + 44 20 8453 6869 E. international@warmup.com warmup.eu V. 03/10...

This manual is also suitable for:

Wmd 2Wmd 3Wmd 4