Siemens ASIC SIM 1-2 Function Manual page 3

For simatic net

Table of Contents

Safety Instructions Regarding your Product

Before you use the product described here, read the safety instructions below

thoroughly.

Qualified Personnel

Only qualified personnel should be allowed to install and work on this equipment .

Qualified persons are defined as persons who are authorized to commission, to

ground, and to tag circuits, equipment, and systems in accordance with established

safety practices and standards.

Correct Usage of Hardware Products

Note the following:

Warning

This device and its components may only be used for the applications described in the

catalog or the technical description, and only in connection with devices or

components from other manufacturers which have been approved or recommended

by Siemens.

This product can only function correctly and safely if it is transported, stored, set up,

and installed correctly, and operated and maintained as recommended.

Before you use the supplied sample programs or programs you have written yourself,

make certain that no injury to persons nor damage to equipment can result in your

plant or process.

EU Directive: Do not start up until you have established that the machine on which you

intend to run this component complies with the directive 98/37/EEC.

Correct Usage of Software Products

Note the following:

Warning

This software may only be used for the applications described in the catalog or the

technical description, and only in connection with software products, devices or