Advertisement
Available languages
Available languages
• Do not leave the product in areas with a high concentration of moisture, steam,
dust, oily vapors, etc.
Foreign material that enters the product may cause a fire or electric shock.
• Make sure not to charge the product when it is used with a wet unit.
This may result in a fire or electric shock.
• Do not leave the product in extremely high temperature environments for an
extended period.
Leaving the product where it will be exposed to extremely high temperatures, such as
near fire or in direct sunlight, may deform the product or cause damage or malfunction
to its internal components. Using the product in these conditions may cause short
circuit, insulation defects, etc., which may in turn cause a fire or electric shock.
• Do not place the product on an unstable surface.
The product may drop, resulting in an injury.
• Use only the specified adaptor and the supplied USB connection cable.
Use of unspecified adaptors or USB connection cables may result in a fire or electric
shock.
Handling and maintenance
Obey the following to ensure proper use and operation of this product.
Operating environment
• Place the product on a flat, stable surface.
• Do not leave the product in places under direct sunlight or around heating appliances.
• Using this product continuously in a hot environment will shorten the product life. Avoid
use in these types of environments.
Handling cautions
• Do not drop the product or subject it to impacts. Doing so may cause malfunctions or
damage.
• If the unit you are using with the product is wet, remove the water by wiping off the
moisture, and thoroughly dry the unit before docking it in the product.
• Do not move or carry while stands are connected. Doing so will cause damage.
Maintenance
• Always disconnect the adaptor before cleaning the product.
• Clean the product with a soft, dry cloth.
• Do not clean the product with solvents such as benzene, thinner, alcohol, or kitchen
detergent because they may affect the surface of the product.
• If the battery charging terminals are dirty, battery charging may not be possible. Clean it
with a soft, dry cloth.
Other information
<For Europe>
This symbol indicates separate collection of waste electrical and
electronic equipment.
More detailed information is contained in the Reference Manual of the
unit.
Declaration of Conformity (DoC)
"Hereby, Panasonic declares that this Charging Cup is in compliance with the essential
requirements and other relevant provisions of EU Council Directives."
Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
<India Only>
Declaration of Conformity with the requirements of the E-Waste (Management) Rules
The Product is in conformity with the requirements of the reduction of hazardous
substances of the E-Waste Rules.
The content of hazardous substance with the exemption of the applications listed in
SCHEDULE II of the E-waste Rules:
1. Lead (Pb) – not over 0.1 % by weight;
2. Cadmium (Cd) – not over 0.01 % by weight;
3. Mercury (Hg) – not over 0.1 % by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1 % by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1 % by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1 % by weight.
For the purpose of recycling to facilitate effective utilization of resources,
please return this product to a nearby authorized collection center,
registered dismantler or recycler, or Panasonic service center when
disposing of this product.
Please see the Panasonic website for further information on collection
centers, etc. , or call the toll-free number below.
Website:
http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html
Service helpline: 1800 103 1333 or 1800 108 1333
Do's & Don't: - Ewaste (Management) Amendment Rules 2018
S.No.
Do's
1
All electrical and electronic products
are required to be handed over only to
the Authorized recycler.
2
The product should be handed
over only to authorized recycler for
disposal.
Don't
The product should not be opened by
the User himself/herself, but only by
authorized service personnel.
The product is not meant for re-sale
any unauthorized agencies/scrap
dealer/kabariwalahs.
S.No.
Do's
3
Keep the product in isolated area, after
it becomes non-functional/un-repairable
so as to prevent its accidental breakage.
4
For more information about collection
and recycling, please contact your
local municipality.
5
Always Dispose products that have
reached end-of life at Panasonic India
Authorized service center.
6
Wherever possible or as instructed,
separate the packaging material
according to responsible waste disposal
options and sorting for recycling.
7
Create environment awareness PAN
India Level.
Description of parts
<Front view>
<Rear view>
Charging cup
1 Release levers
Releases the lock for the unit attached to this product.
2 Battery charging terminals
3 micro USB port
Docking and charging the unit
• When the unit is docked, the unit's indicator (A in the illustration below) lights in orange
while the battery is charging, and lights in green when charging is complete. For more
about the charging time, refer to the Reference Manual of the unit.
• Charge the battery in environments with an ambient temperature of 10 °C to 35 °C
(50 °F to 95 °F).
• When attaching, take care so that the strap, etc. does not get caught between the unit
and the charging cup.
1
Insert the USB connection cable straight
into the rear indentation as shown in the
illustration, and insert into the micro USB port.
• Plug the AC plug of the adaptor into a power outlet.
2
Firmly insert the unit until you hear a click.
■ When using a stand
• First connect the USB connection cable to the charging cup.
1
Firmly dock the charging cup onto the stand (1).
• Be careful not to get the USB connection cable caught in
the charging cup.
2
Insert the unit (2).
• Make sure that the unit is firmly inserted.
Removing the unit
1
While pressing the left and right release levers,
pull out the unit.
■ When using a stand
1
To remove the unit, lift the unit up as is.
2
To remove the charging cup from the stand, insert
your fingers into the indentation as shown in the
illustration, and pull up.
Don't
The product is not meant for mixing
into household waste stream.
Do not keep any replaced spare part(s)
from the product in exposed area.
Do not donate old electronic items to
anybody.
Do not give e-waste to informal and
unorganized sectors like Local Scrap
Dealer/ Rag Pickers.
Do not dispose your product in
garbage bins along with municipal
waste that ultimately reaches landfill.
Stand
4 Joint
Allows you to connect
an identical stand.
5 Screw holes
Advertisement
