Exibel SM-608AG Instruction Manual

5-Button Wireless Mouse
Art.no 38-6145 Model SM-608AG
Please read the entire instruction manual before using
the product and then save it for future reference. We
reserve the right for any errors in text or images and any
necessary changes made to technical data. In the event
of technical problems or other queries, please contact
our customer services.

Operating instructions

Note: The mouse has silent buttons which make no
clicking sound.

Battery

1. Remove the battery cover on the base of the mouse
and insert 2 × AA/LR6 batteries. Note the polarity
markings in the battery compartment to ensure
correct battery insertion.
2. Refit the battery cover.
The mouse automatically enters sleep mode after
30 minutes of disuse to save battery power.
The mouse wakes up as soon as any of the buttons
is pressed. The mouse can be completely switched off
using the ON/OFF power switch on the base.
UNITED KINGDOM - CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk
internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
English
Connecting
1. Remove the receiver from its storage place on
the base of the mouse and plug it into a USB port
on your computer.
2. Switch the mouse on using the power switch
(ON/OFF) on the base of the mouse.
3. The mouse will install itself automatically.

If the connection fails

Check the mouse batteries and change if necessary.

DPI

DPI = Dots per inch (how fast
the mouse pointer can move
across the screen). Press
repeatedly to select 1000,
1200 or 1600 DPI.

Resetting the mouse back to factory settings

If the mouse does not work properly despite having new
batteries, the problem might be fixed by resetting it to
factory settings.
1. This procedure is done by first removing the USB
receiver from the computer.
2. Switch the mouse on using the power switch on
the base of the mouse.
3. Press and hold down both the right mouse button
and the clickable scroll-wheel simultaneously and
then plug the USB receiver back into the computer.
This will then reset the mouse back to its factory
settings.
Store the USB receiver in its allocated slot on the base of
the mouse during transport.

Care and maintenance

• Clean the mouse using a lightly moistened cloth.
Use only mild cleaning agents, never solvents or
corrosive chemicals.
• Remove the batteries if the mouse is not to be used
for a long period.

Responsible disposal

This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any harm to
the environment or health hazards caused by
incorrect waste disposal, the product must
be handed in for recycling so that the material can be
disposed of in a responsible manner. When recycling your
product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.