Table of Contents
Advertisement
2. Raincoat
The built-in raincoat is at the bottom of the backpack.
NOTE: The controller has passed the standard IPX4 water splash environmental
test. Use the built-in water-resistant raincoat to protect your backpack from rain.
3. Y cable
If your powerbank has only one output port, the Y cable helps you to charge
your device and light up backpack at the same time.
1.
Connect the built- in USB Type-A cable (a) to Y cable -Type-A cable (b).
2.
Connect the Type-A cable
3.
Connect the Type-A cable
NOTE: The output voltage of the USB 2.0 USB Type-A Cable is 5V / 3A. Fast
charging function depends on your device and power source.
WARNING:
•
DO NOT remove the non-detachable controller and cable from your
backpack.
•
This product should only be used in environment with ambient
temperatures between -10°C (14
•
The LED module may become warm while in use. DO NOT disconnect your
LED module as this may result in an electric shock or malfunction
to your powerbank.
(c)
to the cable of your device.
(d)
A a
A a
b
c
b
c
d
d
°F
) and 45°C (113
inside
NOTE: You can directly charge your
device without opening the main
compartment of the backpack by
connecting the Type-A cable (d) to
your device cable through a cable
management hole.
A a
b
c
A a
d
b
c
d
°F
).
5
Advertisement
Table of Contents
