Table of Contents
Advertisement
Software interface
Audio setting
6. OUTPUT EQUALIZER
Output channels have separate 9-band equalizers. Each band can be set as
parametric (PEQ), low or high shelf (LSLV / HSLV).
Click and hold left button on the yellow circle with a band number and drag it
in the frequency plot to set the frequency and gain. Use right mouse button to
change Q setting for PEQ band.
Every parameter can also be set by entering specific values in the chart.
EQ BYPASS button mutes and unmutes all EQ bands at once.
EQ RESET button restores all EQ settings to the default values.
08
USER MANUAL
DSP 24 Digital Signal Processor
7. OUTPUT DELAY
Set a delay for each output channel. Delay range is 0.01-8.30 ms., value can also
be entered in milliseconds or in centimetres or inches.
Advertisement
Table of Contents
