Roper RT18BK Use And Care Manual page 7

Installing it properly
1. Allow % inch (1.25 cm) space on each
side and
at
the top of the refrigerator for
ease of installation.
2. If the hinge side of the irefrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
3. The refrigerator can be flush against the
back wall.
4. If your refrigerator has ;an automatic ice
maker, hook up the ice maker water
supply. (See Installation Instructions.)
Leveling it
Your refrigerator has 2 front leveling
screws-one on the right and one on the left.
To adjust one or both of these, follow the
directions below.
1. Remove base grille. (See page 15.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
Right
to raise;
left to
lower
screwdriver
wise.
4.
Check with level.
5. Replace base grille. (!&e page 15.)