Advertisement
o
Separate articles are available to
TVs.
o
You can also check the device manual for specific instructions.
9. Some remote controls can be set for different functions. Make sure that you select the
correct function (TV, BD, DVD, AUX, STB, etc.).
10. Check and adjust the Command Mode setting on your device if your remote control
works with a CD or DVD player, receiver, etc.
o
Command Mode is used when multiple players are used with a single remote.
o
On some players, Command Mode is listed under Options in the Setup menu.
11. Turn off the Light Sensor setting, if applicable.
0. On the TV, not on the remote control, press the HOME button.
1. Using the up or down arrow select Preferences.
2. Press the INPUT button.
3. Press the up or down arrow to select ECO.
4. Press the INPUT button.
5. Use the up or down arrow to select Light Sensor.
6. Press the INPUT button.
7. Press the or down arrow to select OFF.
8. Press the INPUT button.
12. Restore your device to factory default settings.
restart an Android TV™
or to
power reset other
Advertisement
