Advertisement
Quick Links
IM-T5669 Rev.01
Instruction Manual
for
C-band 5W BUC
[NJT5669, NJT5670, NJT5675 &
NJT5677 series]
Document Part Number: IM-T5669
Revision: 01
Issue Date: November 28, 2011
Copyright © 2011, New Japan Radio Co., Ltd. All rights reserved.
This instruction manual may not be reproduced, in part or in
whole, without the permission of New Japan Radio Co., Ltd.
The specifications and information regarding the products in this
instruction manual are subject to change without notice.
All statements, information, and recommendations in this
instruction manual are believed to be accurate but are presented
without warranty of any kind, express, or implied.
Users must take full responsibility for their application of any
products.
NJT5669/70/75/77 series Instruction Manual
Page 1
Advertisement
Related Manuals for JRC NJT5669 Series
Summary of Contents for JRC NJT5669 Series
- Page 1 IM-T5669 Rev.01 Instruction Manual C-band 5W BUC [NJT5669, NJT5670, NJT5675 & NJT5677 series] Document Part Number: IM-T5669 Revision: 01 Issue Date: November 28, 2011 Copyright © 2011, New Japan Radio Co., Ltd. All rights reserved. This instruction manual may not be reproduced, in part or in whole, without the permission of New Japan Radio Co., Ltd.
- Page 2 IM-T5669 Rev.01 General Caution NJRC strives to produce reliable and high quality microwave components. NJRC's microwave components are intended for specific applications and require proper maintenance and handling. To enhance the performance and service of NJRC's microwave components, the devices, machinery or equipment into which they are integrated should undergo preventative maintenance and inspection at regularly scheduled intervals.
- Page 3 IM-T5669 Rev.01 General Caution (continued) NJRC's products have been designed and tested to function within controlled environmental conditions. Do not use products under conditions that deviate from methods or applications specified in the catalog and specification sheets. Failure to employ NJRC's products in the proper applications can lead to deterioration, destruction or failure of the products.
-
Page 4: Table Of Contents
IM-T5669 Rev.01 About This Instruction Manual This instruction manual describes C-band 5W BUC (Model No.: NJT5669, NJT5669F, NJT5670, NJT5670F, NJT5675N, NJT5675F, NJT5677N and NJT5677F) herein referred to as "the Unit". This instruction manual provides information and instructions for installation and operation of the Unit. -
Page 5: Introduction
IM-T5669 Rev.01 1. Introduction This instruction manual is for C-band 5W BUC with followint model number: NJT5669, NJT5669F, NJT5670, NJT5670F, NJT5675N, NJT5675F, NJT5677N and NJT5677F. Standard C-band 5W BUC (Model No.: NJT5669 and NJT5669F) receives a reference signal (10 MHz) and an IF signal (L‐Band: 950 to 1,525 MHz) input and transmits an RF signal (Standard C-band: 5.850 to 6.425 GHz) output. - Page 6 IM-T5669 Rev.01 The detail of frequency for the reference, IF, RF and local oscillaton is mentioned in a chart below. Model Local Oscillation Refefence Number Frequency Frequency Frequency Frequency NJT5669 5.850 4.90 GHz NJT5669F to 6.425 GHz to 1,525 MHz NJT5675N 6.365 1,065...
-
Page 7: Safety Instructions
IM-T5669 Rev.01 2. Safety Instructions Use the following safety guidelines to help protect the Unit from potential damage and to help ensure your own personal safety. DANGER, WARNING, CAUTION, and NOTE Statements DANGER, WARNING, CAUTION, and NOTE statements are used throughout this instruction manual to emphasize important and critical information. - Page 8 IM-T5669 Rev.01 Symbol Description GENERIC HAZARD ELECTRIC HAZARD HOT SURFACE When installing the Unit, observe the following safety guidelines. 2.1. Safety Statements 1. Opening / Removing DO NOT dismantle this product. Dismantlement may cause malfunction and electric shock. 2. Input Voltage Only input a voltage within the range indicated in specified voltage.
- Page 9 IM-T5669 Rev.01 4. High Temperatures DO NOT touch the body, especially fins, during operating the Unit. High touch temperatures may exist, depending on load conditions. 5. Input Level DO NOT input an IF signal over the range of +13 dBm maximum and a reference signal within the range of -5 to +5 dBm.
- Page 10 IM-T5669 Rev.01 3. Waveguide DO NOT touch the filter in the waveguide output. The filter is used for Receive band noise and spurious rejection. If the filter is damaged or dirty, it may not reject a sufficient value of false receive band. 4.
-
Page 11: Packing List
IM-T5669 Rev.01 3. Packing List The Unit is shipped in a single shipping container with the following content: Description 1 unit C-band 5W BUC NJT5669, NJT5669F, NJT5670, NJT5670F, NJT5675N, NJT5675F, NJT5677N, NJT5677F 1 set Accessory of BUC Qty(1), O-ring 1 sheet Date sheet NJT5669/70/75/77 series Instruction Manual Page 11... -
Page 12: Overview
IM-T5669 Rev.01 4. Overview The Unit transmits an RF singal of C-band with up to 5W (+37 dBm) linear. The unique features are ・ High Efficiency & Low Distortion * P1dB: +37 dBm min. over temperature * Power Consumption: 48 W max. ・... - Page 13 IM-T5669 Rev.01 Block Diagram NJT5669/70/75/77 series Instruction Manual Page 13...
-
Page 14: Physical Description
IM-T5669 Rev.01 5. Physical Description This section describes appearance and outline for the Unit. 5.1. Appearance Overall Picture (N-type Female Connector) NJT5669/70/75/77 series Instruction Manual Page 14... - Page 15 IM-T5669 Rev.01 5.2. Outline 5.2.1. Outline Drawing of N-type Female Connector Model (166 .9) Ｃ ＰＲ－ １ ３ ７Ｇ ８－Ｎ ｏ ． １ ０－ ３ ２ＵＮ Ｆ ｄ ｅ ｐ ｔ ｈ ６ ｍ ｉ ｎ ． 42 .9 Ｌ ＥＤ Ｉ...
- Page 16 IM-T5669 Rev.01 5.2.2. Outline Drawing of F-type Female Connector Model (161 .8) Ｃ ＰＲ－ １ ３ ７Ｇ ８－Ｎ ｏ ． １ ０－ ３ ２ＵＮ Ｆ ｄ ｅ ｐ ｔ ｈ ６ ｍ ｉ ｎ ． 42 .9 Ｌ ＥＤ Ｉ ｎ ｄ ｉ ｃ ａ ｔ ｏ ｒ Ground Hole Ｎ...
- Page 17 IM-T5669 Rev.01 5.3. Description of Connectors, Switches, and LEDs Item Description Purpose N-type IF / Reference The Unit receives an IF signal and a Input reference signal and is required to F-type supply +15 to +30 V DC power via this Female DC Power Input connector.
-
Page 18: Installing
IM-T5669 Rev.01 6. Installing This section describes basic installation for the Unit. 6.1. Mounting Configuration The Unit can be mounted with OMT or the waveguide filter of the satellite antenna. When mounting on the OMT or the waveguide filter, follow the following caution: DO NOT block the fins. - Page 19 IM-T5669 Rev.01 Step 2: Prepare the bolts or screws of the length based on a table below, spring washers, and flat washers for No.10-32UNF of 8 sets, before fixing the OMT or the waveguide filter. Secure the OMT or the waveguide filter to the Unit by fixing the bolts or screws with 2.39 to 2.91 N・m torque as shown in a figure below.
- Page 20 IM-T5669 Rev.01 6.2. Connecting Modem The Unit is connected the modem. 6.2.1. Connecting Coaxical Cable. The Unit receives the reference and the IF signal and is required to supply +15 to +30 V DC power from the modem via coaxial cable. When connecting the coaxial cable from the modem, follow the following steps: Step 1:...
- Page 21 IM-T5669 Rev.01 6.2.2. Fixing Ground Wire The Unit should be common with ground of other equipments (e.g. antenna). Fixing a ground wire from the common ground of other equipments for grounding is proceed with the following step: Step 1: Fix the ground wire from other equipments to the ground hole near the coaxical connector with enclosed on the Unit which is shown in a figure below.
-
Page 22: Specification
IM-T5669 Rev.01 7. Specification The Unit is in compliance with the following specifications: 7.1. Electrical Specifications Item Specifications Output Frequency Range <Standard C-band> 5.850 to 6.425 GHz <Palapa C-band> 6.365 to 6.725 GHz <Full C-band> 5.850 to 6.725 GHz <Insat C-band> 6.725 to 7.025 GHz Input Frequency Range <Standard C-band>... - Page 23 IM-T5669 Rev.01 Item Specifications Output Load VSWR for Non Infinite : 1 Damage DC Power Requirement [Voltage Range] +24 VDC (+15 to +30 VDC) [Power Consumption] 48 W max. Mute Shut off the HPA in case of L.O. unlocked LED Indicator GREEN: L.O.
Need help?
Do you have a question about the NJT5669 Series and is the answer not in the manual?
Questions and answers