Aries S225044-2 Installation Manual

INSTALLATION MANUAL
Level of Difficulty
Easy
Parts List
1 Driver / left running board
1 Passenger / right running board
6 Mounting bracket, universal
12 Hex bolt, M10
12 Flat washer, M10
12 Lock washer, M10
18 Nylock nut, M8
18 Flat washers, M8
Tools Required
Ratchet Torque wrench
Socket set Level
Torque Specifications
M6 bolt 3 ft-lbs.
M8 bolt 7 ft-lbs.
M10 bolt 16 ft-lbs.
M12 bolt 28 ft-lbs.
1/4" bolt 3 ft-lbs.
5/16" bolt 7 ft-lbs.
3/8" bolt 16 ft-lbs.
7/16" bolt 20 ft-lbs.
1/2" bolt 28 ft-lbs.
Use above torque setting unless otherwise noted
Product Registration
CURT Group stands behind our
products with industry leading
warranties. You can help us continue
to improve our product line and
help us understand your needs by
registering your purchase by visiting:
warranty.curtgroup.com/surveys
At CURT Group, customer is king.
We value your feedback and we use
that information to make improvements
on our products. Please, take a minute
and let us know how we are doing.
ARIESAUTOMOTIVE.COM
Product Photo
Brackets and Hardware
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
• NEED ASSISTANCE? • 877.287.8634 • S225044-2-INS-RB • PAGE 1
S225044-2
Front
Middle
Front
Rear
Rear