Table of Contents
Advertisement
Installing
Your Freezer
Proper installation of any appliance is very important. This section will tell you everything you
need to know to install your freezer properly.
Cleaning
your freezer
Clean your freezer thoroughly
before using it.
1.
Use a sponge, cloth, or paper towel and
mild detergent in warm water to clean
outside and inside of freezer, door liner,
and gasket.
2. Rinse and dry thoroughly.
Locating
the proper
electrical
supply
Fire Hazard
Do not use an extension
cord.
Electrical
Shock Hazard
Doing
so can result
in death,
fire, or
electrical
shock.
Plug into a grounded
three-prong
outlet.
Recommended
Grounding
Method
A 115 Volt, 60 Hz., AC only 15 or 20
ampere fused and properly grounded
electrical supply is required. It is recom-
mended that a separate circuit serving only
this appliance be provided. Use a recep-
tacle which cannot be turned off with a
switch or pull chain. Do not use an exten-
sion cord.
Attach power cord lock, from literature
package inside the freezer, over power cord
plug. See Electrical Requirements
and
Grounding Instructions Sheet in literature
package for complete details.
Do not remove ground
prong.
Do not use an adapter.
Failure to follow these instructions
can cause death, fire, or electrical
shock.
&prong
grounding
P
type wall receptacle
-
Power cord lock
Freezer
power plug
plug
5
Advertisement
Table of Contents
