Whirlpool TUD8700SQ Installation Instructions Manual page 9

Undercounter dishwasher plastic giant tub models
Table of Contents

Advertisement

Available languages

Available languages

Option B, No waste disposer – no air gap
No waste disposer – no air gap
Waste tee
Waste tee
Waste tee
Drain trap
Drain trap
1. Connect black end of of drain hose to
1
Black end
waste tee and cut if needed.
(Do not cut ribbed section.)
2. Attach black end of drain hose to waste
2
tee with a large silver drain hose clamp
(provided). Use pliers to squeeze clamp
open and move into position. If the drain
hose was cut use a 1-1/2" to 2" (3.8 to 5
cm) screw-type clamp (not provided).
Option C, Waste disposer – with air gap
Waste disposer – with air gap
Screw-type clamps
Screw-type clamps
Screw-type clamps
Disposer inlet
Disposer inlet
1. Using a hammer and screwdriver,
1
knock plug into disposer.
2. Use needle nose pliers to remove
2
plug.
3. Connect black end of drain hose to air
3
Black end
gap and cut if needed. (Do not cut
ribbed section.)
4. Attach drain hose to air gap with large
4
silver drain hose clamp (provided).
Use pliers to squeeze clamp open and
move into position. If the drain hose
was cut, use a 1-1/2" to 2"(3.8 to 5
cm) screw-type clamp (not provided).
5
5. Use a rubber hose (not provided) with
screw-type clamps (not provided) to
connect from air gap to disposer inlet.
Screw-type
Large silver
drain hose clamp
clamp
Drain hose
Air gap
Air gap
Large silver drain
Large silver drain
hose clamp
hose clamp
(provided)
Rubber hose
connector
Drain hose
Drain trap
Option D, No waste disposer – with air gap
No waste disposer – with air gap
Screw-type clamps
Screw-type clamps
Screw-type clamps
Waste tee
Waste tee
Drain trap
Drain trap
1. Connect black end of drain hose to air
1
Black end
gap and cut if needed. (Do not cut
ribbed section.)
2. Attach drain hose to air gap with large
silver drain hose clamp (provided).
2
Use pliers to squeeze clamp open and
move into position. If the drain hose
was cut, use a 1-1/2" to 2"(3.8 to 5 cm)
screw-type clamp (not provided).
3
3. Use a rubber hose (not provided) with
screw-type clamps (not provided) to
connect from waste tee to air gap.
Air gap
Air gap
Large silver drain
Large silver drain
hose clamp
hose clamp
(provided)
Rubber hose
connector
Drain hose
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents