Foreseeablemisuse; Gettingstarted - Kranzle FoamBoy 500 Operating Instructions Manual

G
In practice, sprayed liquids are a mixture of
various substances whose composition is
only known to the manufacturer. The suit-
ability of the unit for a specific liquid must
therefore be determined before use by the
user in conjunction with the manufacturer
of the substance.
Foreseeable misuse
G
The device is not suitable for:
- formic and hydrofluoric acid in any
concentration.
- acids and alkalis at concentrations
greater than the amounts quoted or
as mixtures.
- oils and fuels.
-Mediawhichmaycauseorpromotecracks
andfissuresintheplasticsused.
- liquids at temperatures over + 40°C.
- inflammable liquids.
- very tenacious or sticky liquids, or liquids
that leave residues, which cannot be
completely poured or flushed out of the
unit (oils and oil-bearing liquids).
G
On request, the manufacturer of the unit
can make available a detailed list of the
materials used in the parts of the unit for
more detailed examination.
G
Unauthorised changes to the unit made by
the user or inappropriate use shall render
null and void the liability of the manufac-
turer for any damage caused as a result.
Ersatzteile auf www.gluesing.net
Getting Started
WARNING!
Healthriskthroughleakingcleaning
fluid!!
Aleakingdeviceorleakingcomponentsmay
resultindrainingorspoutingofcleaningfluid.
Forthisreason,observethefollowingsafety
instructions:
-Check that the unit is in perfect condition
and properly sealed each time before use.
Pull up the safety / pressure relief valve (A)
by hand and check that it returns to the
starting position.
-Onlyoperateormovedevicewhenstanding
upright.
-Inspectallscrewjointsfortightfitting.
G
Removethepump(B) byturningittothe
left.Beforedoingthisreleasepumprods,
turnthem180°and transmitthesrewforce
viathebackofthezwistlocksonthepump
housing.
G
Fill the tank, see "Max. filling volume" in
the Technical data section for details on the
maximum amount that can be put in.
WARNING!
Contactwithcleaningfluidsposesa
healthrisk.
Observethemax.fillingamount(see
TechnicalData)andthecorrectdosinggiven
bythesprayproducer.
G
Insertpumpassembly(B) andscrewtight.
G
Pumpuptheunit. Observe the safety /
pressure relief valve (A)during pumping.
Peak pressure is reached when the safety /
pressure relief valve is triggered.
13
GB