Stm32 Example; Hardware Connection - Waveshare L76X GPS HAT User Manual

L76X GPS HAT User Manual
Data printed first is original data.
Time: L76X GPS HAT output time.
Code will set the module to Backup mode after running for one miniature, you need to type any
character and Enter to wake it up.
【Note】Even the default baud rate of L76X GPS HAT is 9600, it is changed to 115200 in code. If you
find that 9600 cannot work next time, please check if it is changed.

STM32 EXAMPLE

The development board used here is Waveshare XNUCLEO-F103RB, whose chip is STM32F103RBT6.
The code is based on HAL

HARDWARE CONNECTION

13 / 15