Sony MSU-750 Operation Manual page 44

Locations and Functions of Parts
qsDisplay window block
1 2
ECS/SHUTTER GAMMA
1 ECS frequency/Shutter speed display window
The currently selected ECS frequency or step shutter
speed is displayed in the window.
Switching between the ECS mode and shutter mode is
made using the Function menu.
When both ECS and Shutter are off, "oFF" is
displayed.
2 GAMMA display window
The currently selected step gamma value is displayed
in the window.
The setting is made using the Function menu.
The higher the gamma effect, the lower the value.
3 MASTER GAIN display window
The selected gain value (dB) of the camera is
displayed in the window.
The setting is made using the Function menu.
4 Filter display window
The currently selected ND and CC filters are
displayed. Filter selection is made using the Function
menu.
ND filter (Examples)
1: Clear
2: 1/4 ND
3: 1/8 ND
4: 1/16 ND
5: 1/64 ND
CC filter (Examples)
A: Cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
E: 8000K
For the Function menu, see pages 14 (E) and 21 (E).
8 (E)
3 4
MASTER ND CC
GAIN FILTER
qdIC card insertion block
ACCESS
IC MEMORY CARD
1
1 ACCESS indicator
Shows the status of the IC memory card.
Indication Meaning or Measures
Off No card is inserted.
Lit in green There is a card in the slot. (The battery
condition is good.)
Lit in orange The battery of the card in the slot
begins losing its charge. Although the
data are still maintained, replace the
battery at the earliest opportunity.
Flashes in orange The battery of the card in the slot is
almost exhausted. While the card
stays in the MSU-750, the MSU-750
supplies the power to the card.
However when the card is ejected, the
data cannot be maintained. Replace
the battery before using.
Lit in red Data are being read/written. If you
eject the disc in this condition, the data
is not guaranteed. All the data may be
lost.
For battery replacement, refer to the instructions for the IC
card.
2 IC card slot
Insert an IC card (which conforms to PCMCIA) to
store reference files, lens files and scene files of the
video camera or CCU.
It also permits the configuration of the CNU-700 and
software installation for version up.
When the card is correctly set, the ACCESS indicator
lights in green.
Note
The data in the memory card is maintained by the
battery built into the card. If the battery is exhausted,
the data in the card will be lost. You can check the
battery condition by the ACCESS indicator. If the
battery becomes weak, replace the battery with a new
one as soon as possible.
2 3