Battery; Charging The Battery - Samsung Galaxy Watch3 User Manual

Getting Started

Battery

Charging the battery

Charge the battery before using it for the first time or when it has been unused for extended
periods.
Use only Samsung-approved battery, charger, and cable specifically designed for your
Galaxy Watch3. Incompatible battery, charger, and cable can cause serious injuries or
damage to your Galaxy Watch3.
• Connecting the charger improperly may cause serious damage to the device. Any
damage caused by misuse is not covered by the warranty.
• Use only wireless charger supplied with the device. The Galaxy Watch3 cannot be
charged properly with a third-party wireless charger.
• To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
• The Galaxy Watch3 has a built-in wireless charging coil. You can charge the battery
by using a wireless charging pad. The wireless charging pad is sold separately. For
more information about available wireless charging pads, refer to the Samsung
website.
1
Connect the wireless charger to the charger and plug the charger into an electric socket.
2
Place the Galaxy Watch3 on the wireless charger aligning the centre of your Galaxy
Watch3's back side with the centre of the wireless charger.
Wireless charger
14