Lower Stamp - Badgematic FLEXI 900 User Manual

MAKING BUTTONS
Filling lower stamp 2:
Turn the swivelling plate by 180° up to the stop. Lower stamp 1 is now
directly underneath the upper stamp and lower stamp 2 is in front of
you. Now put the metal backside into lower stamp 2. Concerning the
backside variation with safety pin, put it into the stamp with the pin
opening downwards (put it straightly into it, just like the paper inlay!).
Concerning the metal ring backside, put the ring into it with the edge
upwards. No matter which backside variation you want to produce,
just keep in mind:
into the stamp, will disappear inside the button later. Or, the other way
round, the side which you can not see after you have put it into it, will
be visible at the backside of the ready made button.
12 English
235-19 badgematic-LA01-A5-JK.indd 38
The side which you can see after you have put it
20.11.2019 15:18:17