Download Print this page

Operating Principle - Gahl 102-1201 Product Manual

Belt driven air compressors

Advertisement

the tools.
9)
High temperatures and moving parts are present in the air compressor, to prevent burns or
other injuries, Do not operate the air compressor with the fence cover. Allow the air compressor
to cool down before handling or servicing.
10) Be certain to red all labels when you are spraying paints or toxic materials, and follow the
safety instructions. Use a respirator mask if there is a chance of inhaling anything you are
spraying. Read all instructions and be sure that your respirator mask will protect you.
11) Always wear safety goggles or glasses when using an air compressor, Never point any
nozzles or sprayer towards a person or any part of the body.
12) Do not adjust the pressure switch or safety valve for any reason, Doing so will voids all
warranties and may cause serious personal injury.
13) Release the drainage from the tank on a daily basis, a clean and dry tank will help prevent
corrosion of the tank, in any circumstances, the air tank of the air compressor shall not be used
more than 7 years, longer use of air tank may cause serious personal injury. Air receiver tank
pressure test shall be done every two year. The surface of the receiver tank should be checked
every year, if there are serious rust, bumps or pressure test failure, then the air receiver tank
should be disposed.
14) Pull the safety valve at least on a weekly basis to check whether safety valve is functioning
properly, if the safety valve is found not functioning properly then it shall be replaced
immediately.
15) To provide proper ventilation for the cooling of the air compressor, the air compressor must
be kept a minimum 31cm distance from the nearest wall in a well ventilated area.
16) Fasten the air compressor securely if transportation is necessarily, pressure within the tank
must be fully released before transportation.
17) Protect the air hose and electric cord from damage, inspect them weekly for weak or worn
spots and replace them if necessary.
3. BRIEF INTRODUCTION OF THE AIR COMPRESSOR
This belt driven air compressor is of novel design and excellent workmanship, having the
advantage of fine appearance, easy operation, less oil waste, longer life, easy removing, low
maintenance cost, high safety. It can be widely used in machinery, chemical industry, spray and
decoration, automatic control system and other applications where compressed air is required.

4. OPERATING PRINCIPLE

4 / 10 pages

Advertisement

loading