Hookup; Right Earpiece Connections And Controls; Bluetooth Pairing And Powering; Track Navigation And Bluetooth Volume - PRESONUS Eris HD10BT Owner's Manual

2.

Hookup

2.1.

Right Earpiece Connections and Controls

2. Hookup
2.1. Right Earpiece Connections and Controls

Bluetooth Pairing and Powering

2.1.1.
Hold for 3 sec
< Settings Bluetooth
Bluetooth
Now discoverable as "My Phone"
My Devices
Other Devices
PreSonus HD10BT
Hold for 5 sec
2.1.2.

Track Navigation and Bluetooth volume

To power on your Eris HD10BT headphones, press and hold the center button for 3
seconds, if no Bluetooth device is paired or the previously paired Bluetooth device is
not available, your Eris HD10BT headphones will enter pairing mode.
While in pairing mode, the LED on the lower right of the earpiece will flash blue and red.
On your Bluetooth device, select "PreSonus HD10BT" from the pairing menu.
To power down your Eris HD10BT headphones, press and hold the center button for
5 seconds.
The following controls are available for use with your
favorite Bluetooth device while listening to audio:
1
2
3
1. Volume Up / Prev Track. Press once to increase the Bluetooth
playback volume. Press and hold to navigate to the previous track.
2. Play/Pause. Press this button to remotely start and
stop playback on your Bluetooth device.
3. Volume Down / Next Track. Press once to lower the Bluetooth
playback volume. Press and hold to advance to the next track.
Eris HD10BT
Owner's Manual
3