This motor unit contains no user serviceable parts. Refer
service to qualified service personnel.
•
Before cleaning, unplug the blender.
•
Always wash immediately after use for easier cleaning. Don't let
food dry on the jar assembly as this will make cleaning difficult.
•
Quick clean: Pour a little warm soapy water into the jar and turn
the knob to P position for a few seconds. And then empty the jar.
•
Dismantle all detachable parts. Lift the jar assembly off the motor
unit, To detach the blade assembly by turning it clockwise from the
jar base bottom , and remove the seal ring 2 and blade assembly.
In addition, detach the jar cover seal ring 1 from the jar cover
SP20180_IM.indd 8
CLEANING & MAINTENANCE
8
12/04/2018 10:53