Disposal Of The Unit - Xylem Lowara EPE2 16 Installation And Operating Instructions Manual

Decommission and place into storage
♦ Always decommission your unit correctly before placing it into
storage.
This ensures that the unit will not suffer any frost damage.
Caution
♦ Disconnect the unit from the power supply before removing the unit from
the on-site heating system and emptying it.
♦ Allow the unit to cool down before emptying it.
Danger
Remove the unit from the on-site heating system
♦ Remove the unit from the on-site heating system.
♦ Work in reverse order to the described filling process.
Empty the unit
♦ Open the KFE of the intake fittings.
♦ This will vent the unit and the water in the boiler will drain more easily.
♦ Connect a water hose to the drain ball cock.
♦ Place the water hose in the drain.
♦ Only then open the drain ball cock and drain all the water in the unit.
Transport and store the unit
♦ Store the unit in a dry place that is protected from frost and dust.

Disposal of the unit

♦ Only dispose of the unit via a specialist disposal company or return it to
the manufacturer.
♦ Never dispose of electrical equipment or the unit's control system via
the household waste.
20
ENGLISH