Advertisement
Selecting
a cycle
.
Door latch-After
closing
tl
latch all the way to the righi
and turns on the dishwasher
'Cl e Cor itrol Knob
he door, move door
'. TI iis lot :ks the door
NORMAL WASH Cycle
A double
wash for normal to heavily
soiled
loads.
(The Energy
Guide
Label data
is based
on this cycle.)
Cycle
time is about
70 minutes.
LIGHT WASH Cycle
For lightly soiled or pre-rinsed
loads.
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time is
about 15 minutes. Use AIR DRY only.
HEAT
DRY or AIR DRY?
If the HEAT DRY Option
is selected,
air In the
dishwasher
is heated
during
the "dry"
part of
the cycle.
Some Items (such as plastics)
may need towel
drying
If the AIR DRY Option
is selected,
air in the
dishwasher
is not heated.
Using this option helps
save energy, but dishes take longerto
dry [over-
night]
and
some
water
spotting
may
result
To add a dish after starting
4.
1. To be sure the added
item is washed
and
rinsed, make sure the Cycle Control Knob has
not passed
LIGHT WASH.
2. Unlatch the door to stop the cycle,
but don't
open it until the spray arm stops spinning.
3. Open the door and add the dish.
5.
Close the door. Do not latch
it. Wait 30 sec-
onds for air in the dishwasher
to warm up. This
helps reduce
theamountofmoisturethatcan
come
from the vent
when
restarting
the
cycle.
Latch the door. The dishwasher
will start from
where it stopped.
9
Advertisement
