Salamander Designs XL Series User Manual page 8

Attach Display to Stand
Attach Display to Stand
Attach Display to Stand
Attach Display to Stand
Loosely install ONE (1) "H" screw to the center of each display bracket.
This will act as an alignment screw for the next step.
Two people are needed to install the display on the stand. Position alignment
screw into the "key hole" slot as shown and continue holding display.
Salamander Designs - XL Electric Lift, Mobile Display Stands www,salamandercommercial.com 501-680 [04.20] page 8 of 24