Simunition FX 9003 Cleaning Instructions

®
FX 9003 Protective Mask
®
FX 9003 Protective Mask
®
The FX 9003 Protective Mask can be equipped with one of two different types of lens configurations: single and double lens
configurations. The user can easily distinguish both lens configurations by identifying the discriminating features on the front of the FX
9003 Protective Mask. Please see the pictures below for both types of lens configurations.
®
FX 9003 Protective Mask,
Double lens configuration is easily distinguishable by its contoured black line, which is visible on the front view of the lens.(See Fig. 1
and 2 for Contoured Black Line location).
Fig.: 1 - FX
(With double lens configuration)
®
FX 9003 Protective Mask,
Single lens configuration is not
Fig.: 3 - FX
(With Single Lens configuration without contoured black line)
Trademarks and registered trademarks of General Dynamics Ordnance and Tactical Systems-Canada Inc. are denoted by TM and
© 2018 GD-OTS Canada
Cleaning instruction for the
®
FX
For use in FX
DO NOT USE WITH ANY OTHER TYPE OR CALIBER OF AMMUNITION.
with Double lens
®
9003 Protective Mask
with Single lens configuration
contoured with a black line. (See Fig. 3 and 4).
®
9003 Protective Mask
9003 Protective Mask
®
interactive training with 9 mm, .38 cal. or 5.56 mm Simunition
®
FX Marking cartridges only.
configuration
Fig.: 2 - FX
(With
Fig.: 4 - FX
(With Single Lens
www.simunition.com
®
9003 Lens Goggle Assembly
double lens configuration)
®
9003 Protective Mask
configuration without contoured black line)
respectively.
®
8972120_Cleaning process_REV05.docx
®
®