Jaxpety HG61H0712-12 User Manual page 6

PRODUCT ASSEMBLY
5
Place the left door column (25L) and (25R) on the top of
basebar (3L) and (3R), Insert into the wall panel, Secare
with (F1) screws.
PART NO. Qty.
25L 1
25R 1
F1 12
9
www.jaxpety.com
PRODUCT ASSEMBLY
6
PART
Place 2 piece of the Gable panel (12R) and (21R) each, on the top of
the slide channel (6) and side top bar (9). Align the holes and secure
them(F1) Screws from inside. Repeat the Sane for the Gable panel
(12L) and (21L). Then assemble 4 Galbe panels together with conneetor
(F1) and assemble the conneettor(B1) as showed. Secure them with
(F2) bolt and nut see figure below. Assemble the roof support to Gable
panels (21L) and (21R), Alige the boles and secure with (F1) screw.
NO. Qty.
12L 1
12R 1
21L 1
21R 1
B1 4
GF 2
F1 14
F2 16
10
www.jaxpety.com