Table of Contents
Advertisement
Access Reader
Run an Ethernet cable from the UA-Hub location to the install
location of the access reader. Depending on your system setup,
the access reader can be installed on either the inside or the
outside of the door.
UA-Pro
1. Separate the UA-Pro from its mount by removing the security
screw from underneath the device.
2. Place the mount against the wall and use it as a template to
mark the area where the UA-Pro will be installed.
3. Use the marked area as a guide to cut a hole in the wall for
the mount.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UniFi Access Control Reader Pro and is the answer not in the manual?
Questions and answers