Advertisement
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SCS S-1
Summary of Contents for SCS S-1
- Page 1 SCS S-1 www.scssa.co.za...
-
Page 2: Table Of Contents
Contents: 1.Outlook / Function ......................1 2.Device Pairing ......................2-5 3.Group Intercom Mode Pairing (Operating Scenario) ......................6-10 4.Q&A / Warning ......................11 5.Statement / Warranty .......................11-12... -
Page 3: Outlook / Function
2 seconds.Redial: Short press function Volume + and function button at the same button twice. time for 5 seconds. Then S-1 will clear the Volume Up: Press Volume + while talking. pairing memory with other devices. Volume Down: Press Volume - while talking. -
Page 4: Device Pairing
2. Device Pairing 2.1 Pair Up to Bluetooth Devices 2.1.1 Pairing Mode When device is on. Long press function button Pairing mode, red and blue light flash, voice message says pairing. - Page 5 2.1.2 Search Mode When device is on. Long press intercom button Search Mode, Red and blue lights flash quickly...
- Page 6 SCS-S1 Switch cellphone Bluetooth, choose S-1, the pairing is complete. Voice message will also say pairing complete. Remark: when pairing complete, please check both cellphone audio and media audio...
- Page 7 Any device with 3.5mm connector can transmit voice signal to S-1. When device wire connected by 2.5mm to 3.5mm cable to S-1 , long press the volume + and volume - at the same time for 3 seconds to switch on the connection .
-
Page 8: Group Intercom Mode Pairing (Operating Scenario)
At first of all , pair up GPS and cellphone Pair up S-1 with GPS , after paired , please switch off the Bluetooth function in GPS Lastly, pair up S-1 with speed detector, after paired, switch on GPS Bluetooth function *S-1 paired with GPS, if don’t switch GPS Bluetooth function, it will interference the pairing... - Page 9 Use 2.5mm to 3.5mm AUX in cable to connect speed detector or radio to S-1 , and switch S-1 to wire connecting (details to 2.3 ) , all audio inter-grade are completed . *Switch on intercom, both rider and passenger can hear audio from GPS, speed detector or radio.
- Page 10 Step 2: Switch A to pairing mode (details to 2.1.1), cellphone search this S-1 and pair it up. Step 3: Keep A in pairing mode (details to 2.1.1), use Bluetooth GPS to search A and pair it up.
- Page 11 3.4 Multiple Intercom\Multiple Intercom Pairing Procedure *Numbers of device which the headset can be paired 4 x S-1 (A,B,C,D), multiple intercom connections , the connection will occupy channels , thus only unit A can connect to the other two Bluetooth devices , the others(B,C,D) can only connect to one Bluetooth device .
- Page 12 3.5 Multiple Intercom Reconnect Procedure S-1 will remember paired units , but after switch off and want to reconnect again , please follow the procedure: Step 1: Switch off all 4 units and all Bluetooth device connected to the headset.
-
Page 13: Q&A / Warning
Long period or too loud may hurt hearing ability . 4.22 Disassemble or Modification The S-1 is precisely made in factory . Any disassemble or modification may damage the device , please do not tear any of the safety regulation and serial sticker from the device , that will void the warranty . -
Page 14: Statement / Warranty
5.Statement / Warranty 5.1 FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the S-1 and is the answer not in the manual?
Questions and answers