BC0530 User Manual
Installation Check List
◊ Is the ice maker and bin assembly level?
◊ Is there proper clearance around the machine for air circulation?
◊ Have all electrical, water and sewer connections been made?
◊ Has the supply voltage been tested with the ice ma+er on a dedicated, protected circuit?
◊ Is the machine installed where ambient air temperatures will range from 45 to 90F (7 to 32C)?
◊ Is the machine installed where incoming water temperatures will range from 45 to 90F (7 to 32C)?
◊ Does the water supply provide a minimum 20 psig dynamic to maximum 100 psig static pressure?
◊ Are there separate drain lines for the ice maker and bin?
◊ Are the ice makers and bin drains vented?
◊ Is the bin thermo probe run correctly, secured, tested and positioned in the bin at the right level?
◊ Are the electrical lines free from contact with refrigerant lines and moving parts?
◊ Are the drain pan and ice chute positioned properly and is the packing tape removed?
◊ Have you cleaned and sanitized the ice maker and bin?
◊ Is the mode selector switch set to the ice position?
◊ Are the cabinet panels secured?
◊ Has the owner been instructed regarding cleaning, maintenance and the manual?
◊ Has the owner completed the registration card?
◊ Have you left the installation and operation manual?
March 2020
Page 10