Download Print this page
Middle Atlantic Products MBRK Series Instruction Sheet

Middle Atlantic Products MBRK Series Instruction Sheet

Fan kit
Hide thumbs Also See for MBRK Series:

Advertisement

Quick Links

Instruction Sheet
MBRK/BRK Series
DCFANKIT-4/IDCFANKIT-4 FAN KIT
TOOLS REQUIRED
(International Model
#2 Phillips screwdriver
IDCFANKIT-4 Only)
PARTS
Inline Thermostatic Controller
Fan Panel
(1)
(1)
#6 X 3/8 Wood Screw
#10 X 5/8 Wood Screw
#10-32 Truss Head Rack
Cable Tie Mount
(3)
(5)
Screw (4)
(5)
12 Volt DC, 0.5 Amp Power Supply
12 Volt DC, 0.5 Amp Power Supply
Wire Tie
(Used with IDCFANKIT-4)
(Used with DCFANKIT-4)
(12)
(1)
(1)
INSTALLATION
NOTE: For optimal thermal management, this DCFANKIT-4/IDCFANKIT-4 Fan Kit must be used with
MAP's RK-RAPxx Rear Access Panel.
1) Remove Top Panel from the rear of the rack, if installed. (See FIGURE A)
TOP PANEL
REAR
FIGURE A
I-00276
Rev C

Advertisement

loading

Summary of Contents for Middle Atlantic Products MBRK Series

  • Page 1 Instruction Sheet MBRK/BRK Series DCFANKIT-4/IDCFANKIT-4 FAN KIT TOOLS REQUIRED (International Model #2 Phillips screwdriver IDCFANKIT-4 Only) PARTS Inline Thermostatic Controller Fan Panel #6 X 3/8 Wood Screw #10 X 5/8 Wood Screw #10-32 Truss Head Rack Cable Tie Mount Screw (4) 12 Volt DC, 0.5 Amp Power Supply 12 Volt DC, 0.5 Amp Power Supply Wire Tie...
  • Page 2 INSTALLATION (Continued) CONSTANT ON JUMPER SETTINGS: The Inline Thermostatic Controller comes with the jumper POSITION installed in the AUTO position (2 center pins) which turns fans on at 87ºF (30.5ºC) and turns fans off at 85ºF (29.4ºC). (See FIGURE B) Jumper installed in the ON (2 right pins) position keeps fans on continuously.
  • Page 3 INSTALLATON (Continued) 3) Install the Fan Panel into the rear of the rack using four FRONT #10-32 Truss Head rack screws. (See FIGURE D) NOTE: Fan panel cord is routed to either the left or right side of fan panel, depending on which side panel the FAN PANEL Inline Thermostatic Controller is...
  • Page 4 WARRANTY Middle Atlantic Products (the "Company") warrants the Fan Kit (DCFANKIT-4/IDCFANKIT-4) to be free from defects in material or workmanship under normal use and conditions for a period of (3) years from date of shipment by the Company.

This manual is also suitable for:

Brk seriesDcfankit-4Idcfankit-4