Before First Use; Keys And Connections Of The Device - Batavia BT-CV001 Operating Instructions Manual

vision and does not pose any
danger if it falls down (e.g.
during hard braking).
• Please always observe local
laws and regulations when
shooting strangers or when
shooting in public places.
• Do not leave the camera in the
car in the presence of extreme
temperatures. Do not expose
the camera to direct sunlight
when you exit the car.
• Do not immerse the camera into
water or any other liquids.
• Handle this device with care. It
can be damaged by impacts,
collisions or when falling from
low heights.
• Do not use car camera video
system if the unit itself or the
power cord has been damaged.
Do not try to repair the unit by
yourself. Do not disassemble the
unit; it does not contain any
parts serviceable by you.

BEFORE FIRST USE

Remove the camera system from
the packaging and check for any
damage in transit.
Dispose of packaging material or
store it out of reach of children.
There is risk of suffocation for
small children!
7061311 Ma # 1202-07.indd 15
Before using the camera for the
first time, fully charge the battery.
KEYS AND CONNECTIONS OF
THE DEVICE
• TV Output (3) – Connect a
standard TV set
• USB Port (4) – To transfer data
and charge the battery of the
camera
• Mode Selection Key MODE (5)
– Select the desired mode:
Shooting videos, taking photos,
audio recording, slide show
• UP Key (6) – Navigate up in the
settings menu
• DOWN Key (7) – Navigate down
in the settings menu
• RESET Key (8) – Reset camera
to the factory default settings
• Power LED (9) – Lights up
during use and when charging
the battery
• SD Card Slot (10) – Slot for
external SD memory cards
• OK Key (11) – Starts and stops
shooting video, takes a photo,
confirms menu selections
• MENU Key (12) – Starts the
settings menu
• POWER Key (13) – Switch on
and off the camera
EN
15
07-02-12 13:38