8. HOW TO MEASURE OBJECT (LIQUID/
FOOD) TEMPERATURE
1. Press the
button to turn the thermometer on. All symbols on the
display will momentarily appear.
2. Ensure that the thermometer is in Object Mode; the Object
symbol will be on the display.
3. Position the thermometer about 3cm (or 1 inch) from the object.
4. Press once the
displayed.
5. About 30 seconds after use, the thermometer will automatically beep
and shut off.
9. CHECK THE MEMORY
The device stores up to 10 measurements which you can share with
physician or trained healthcare professional.
1. When the device is on, press once the
show the last measurement.
2. The
symbol or
measurement for representing body or object temperature reading.
3. Press each to proceed to next reading.
4. To clear all the memory, press and hold
seconds until you see "- -" on display and hear the beep.
Note: Both Forehead or Object records will all be cleared.
12
button and the temperature reading will be
symbol will appear together with each
3cm (or 1 inch)
button, then press again to
button for more than 3
How To Measure Object (liquid/food) Temperature