Operating - no!no! Precision Trimmer Getting Started

Operating

Your no!no! Precision Trimmer is perfectly suited for closely and safely removing any
®
unwanted hair on body and face e.g. neck, back, eyebrows.
The product comes with two trimming combs long
uniform length.
Ensure the appliance is turned OFF before attaching a trimming comb. We recommend
6
that you start with the long trimming comb
Make sure that the teeth of the comb are facing in the same direction as the trimming blades.
Slide the comb over the trimmer head until it clicks into place.
Slide the ON/OFF switch up to the '1' position to turn the appliance on.
6
Ensure that the comb is laid flat against the skin.
Place the trimmer gently against the hair to be removed and glide it slowly against the
direction of hair growth.
For optimum results, pull the skin taut with one hand while using.
When trimming is complete, remove the comb and place the protective cap
trimmer head to protect the blades when not in use.
The no!no! Precision Trimmer can also be used without the long
®
and short for trimming hair to a
2 3
.
2
over the
8
or short trimming
2 3
12
comb to edge and shape areas as desired.
A smaller (6mm) trimmer head is supplied for precision trimming and smaller areas.
1
Pull your skin taut with one hand and glide the trimmer against the direction of hair growth.
Put the protective cap on to keep blades new and place the trimmer in the storage
8
stand to keep it tidy.
4
Changing the Trimmer Heads
To use the smaller trimmer head, remove
the larger (18mm) trimmer head from the
5
unit by turning it 45° in an anti-clockwise
direction. Gently lift-off the larger (18mm)
trimmer head from the unit and insert the
5
smaller trimmer head into the unit. Lock it
1
into place by following the reverse method of
removing the trimmer head.
B
C
A
13
D