Vmac RAPTAIR60 Service Procedures

Service Procedures for RAPTAIR60 Engine
First 50 Hour and Every 100 Hour Engine Service Kits A500007 (RAPTAIR60)
A 100 hour service kit will contain an engine oil filter, fuel filter, and 1.06 USG (4 liters) of 15W40 engine oil.

Safety and Service Precautions

Observe these precautions when performing any service:
Never attempt to clean the air filter element with compressed air. Remove the air filter element from the air cleaner body
and lightly tap or shake to remove any particulate or debris. Wipe out the inside of the air filter body with a dry cloth and
reinstall air filter element.
To prevent damage to the oil filter, always use a proper filter wrench. Never over-tighten the filter, as this may damage
the seal or the filter.
!
You must make sure that there is no pressure left in the system. If there is a pressure gauge, make sure that
it is at zero before commencing service. If you are not sure, attach a tool or air nozzle to the air outlet and
make sure that there is no pressure.
Observe all safety procedures relating to moving belts, hot oil and compressed air. Use all safety equipment to protect
yourself.
Check the old oil for any evidence of metal filings or contamination; if found, contact your local Kubota dealer.
For complete engine maintenance routines, refer to the Kubota Engine Manual supplied with the RAPTAIR60
(VMAC p/n: 1900919).
Follow all safety precautions outlined in the Kubota Engine manual and RAPTAIR60 manual when
performing any maintenance routines.
VMAC – Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289
Local 1-250-740-3200
Fax: 1-250-740-3201

Engine Service Kit Contents

General Service Information

100 Hour Service Procedures

1