Advertisement
Quick Links
Features
• Supports HDMI 1.3, HDCP 1.4
• Supports 1080p@60Hz
• Extend over a Cat5e/6 cable up to 120m
• Support IR frequence 20-60kHz
Package contents
• HDMI HDbitT Extender TX & RX
• Power adapter DC 5V/1A x2
• IR Blaster cable
• IR Receiver cable
• Quick Start Guide
Layout
Transmitter
1. Reset: Press to reset if HDMI extender
doesn't work properly
2. HDMI In: Connect with HDMI source device
3. IR OUT: Connect with IR Blaster cable
4. Power Jack: Connect with power adapter
5. Power LED: On when the device is powered
6. RJ45: Link to the RX via a Cat5e/6 cable
7. Activity LED: Bilnks during data transmission
8. LINK LED: On when the TX/RX connected
Receiver
1. Reset: Press to reset if HDMI extender
doesn't work properly
2. HDMI Out: Connect with HDMI display
3. IR IN: Connect with IR Receiver cable
4. Power Jack: Connect with power adapter
5. Power LED: On when the device is powered
6. RJ45: Link to the TX via a Cat5e/6 cable
7. Activity LED: Bilnks during data transmission
8. LINK LED: On when the TX/RX connected
Advertisement
Related Manuals for AceProAV CE501
Summary of Contents for AceProAV CE501
- Page 1 Features Layout Receiver • Supports HDMI 1.3, HDCP 1.4 Transmitter • Supports 1080p@60Hz • Extend over a Cat5e/6 cable up to 120m • Support IR frequence 20-60kHz 1. Reset: Press to reset if HDMI extender Package contents doesn’t work properly 1.
- Page 2 Application 1. Point to point: Up to 120m over Cat6 cable HDMI Over Cat6 Extender with IR - 120m Quick Start Guide 2. One to many: By using Ethernet switch, one sender to severl receivers. BLANK PAGE (Signal broadcast in network, recommend don’t mix with data network)
Need help?
Do you have a question about the CE501 and is the answer not in the manual?
Questions and answers