Sioux Tools DAAY POWER SWEEP Owner's Manual
  1. Manuals
  2. Brands
  3. Sioux Tools Manuals
  4. Floor Machine
  5. DAAY POWER SWEEP
  6. Owner's manual

Sioux Tools DAAY POWER SWEEP Owner's Manual

Hide thumbs Also See for DAAY POWER SWEEP:
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL NO. 689865
12/1/2017
OWNERS MANUAL
DAAY POWER
SWEEP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DAAY POWER SWEEP and is the answer not in the manual?

Questions and answers

Related Manuals for Sioux Tools DAAY POWER SWEEP

Summary of Contents for Sioux Tools DAAY POWER SWEEP

  • Page 1 MANUAL NO. 689865 12/1/2017 OWNERS MANUAL DAAY POWER SWEEP...

  • Page 2: Table Of Contents

    7’ Daay Power Sweep Parts List for a 15’ dia. Bin ............. 6-2 8’ 6” Daay Power Sweep Layout Diagram for a 18’ dia. Bin ........6-3 8’ 6” Daay Power Sweep Parts List for a 18’ dia. Bin ..........6-4...
  • Page 3 10’ Daay Power Sweep Parts List for a 21’ dia. Bin ............ 6-6 11’ 6” Daay Power Sweep Layout Diagram for a 24’ dia. Bin ........6-7 11’ 6” Daay Power Sweep Parts List for a 24’ dia. Bin ..........6-8 13’...
  • Page 4 CONTENTS CONTENTS PAGE SECTION 6 - PARTS DIAGRAM AND DESCRIPTION (687933) Paddle Chain Parts List ................6-43 (688581) Paddle Chain Parts List ................6-44 (688583) Paddle Chain Parts List ................6-44 (688584) Paddle Chain Parts List ................6-44 (688585) Paddle Chain Parts List ................6-45 (688587) Paddle Chain Parts List ................

  • Page 5: Introduction

    It is recommended that you read this manual in its entirety for the information available in order to provide the proper care and maintenance of the Daay Power Sweep. The equipment is built to provide many years of dependable service when used properly. Reading this manual will also provide information on how to use the equipment correctly to prevent any accidents while using the system.

  • Page 6: Safety Alert Symbol

    SECTION 1 - SAFETY INFORMATION SAFETY ALERT SYMBOLS The symbol shown below is used to call your attention to instructions concerning your personal ATTENTION! safety. Watch for this symbol it points out important safety precautions. It means Become Alert! Your Personal Safety Is Involved! Read the message that follows and be alert to the possibility of personal injury or death.
  • Page 7 SECTION 1 - SAFETY INFORMATION SAFETY A careful operator is the best operator. Most accidents can be avoided by observing certain precautions. To help prevent accidents, read the following precautions before operating this equipment. Equipment should be operated only by those who are responsible and instructed to do so. Carefully review the procedures given in this manual with all operators.

  • Page 8: Safety & Logo Decals

    SECTION 1 - SAFETY INFORMATION SAFETY & LOGO DECALS P/N 686033 P/N 689871 P/N 666941 P/N 689873 P/N 689874-##...
  • Page 9 SECTION 1 - SAFETY INFORMATION This Page Left Blank...

  • Page 10: Section 2 - Specifications

    SECTION 2 - SPECIFICATIONS FEATURES • Capacity: 5000 bu/hr @ 350 rpm tightner shaft speed • Chain speed: 390 feet per minute • Drive tire size: 5” x 8” -15” height segmented wheel • Drive wheel powered by a 40:1 gearbox off the paddle chain. •...
  • Page 11 SECTION 2 - SPECIFICATIONS DIMENSIONS AND WEIGHTS (Continued) Bin Size Sweep Size 8' 6" 11' 6" Length (Dim A) 95.25" 113.25" 131.25" 149.25" 167.25" Height-Sweep (Dim B) 17.50" 17.50" 17.50" 17.50" 17.50" Height-Pivot (Dim C) 27.13" 27.13" 27.13" 27.13" 27.13" Width (Dim D) 34.56"...

  • Page 12: Layout Dimensions

    SECTION 2 - SPECIFICATIONS LAYOUT DIMENSIONS Nominal Bin Sweep Length from Caster Wheel Path Drive Wheel Path Dia. Pivot 6' 4" 7' 10" 5' 4" 4' 9" 7' 0" 6' 8" 7' 10" 9' 4" 5' 4" 6' 3" 7' 0" 8' 2"...
  • Page 13 SECTION 2 - SPECIFICATIONS This Page Left Blank...

  • Page 14: Section 3 - Installation

    We recommend steel plating (1/8”) installed in • specific areas to support the grain sweep on top of Since the power for the Daay Power Sweep is the aeration floor during burial. The specific thru the gearbox, lock out tag out awareness locations we recommend steel support plating are should be followed.

  • Page 15: Drive End Assembly

    SECTION 3 - INSTALLATION DRIVE END ASSEMBLY Drive End Assembly: Reference the following parts of this manual. See Table of Contents for specific page numbers. • Drive End Assembly Diagram for a overall detailed view. • Drive End Assembly Parts List for the proper fasteners.
  • Page 16 SECTION 3 - INSTALLATION DRIVE END ASSEMBLY (Continued) 7. Install the 15 link chain (688422) onto the Drive Gearbox Bracket Wldt between sprockets. 2.75” and 2.875”. 8. Slide the Drive Gearbox Bracket Wldt for- 11. Install the wheel (689095) onto the Wheel ward to tighten the chain.

  • Page 17: Pivot End Assembly

    SECTION 3 - INSTALLATION PIVOT END ASSEMBLY Pivot End Assembly: Reference the following parts of this manual. See Table of Contents for specific page numbers. • Pivot End Assembly Diagram for a overall detailed view. • Pivot End Assembly Parts List for the proper fasteners.
  • Page 18 Lock Arms. · The proper holes to use is not im- portant at this time. The length will be adjusted when the Daay Power Sweep is connected to the gear box. · Hand tighten nuts only. 6. Ensure all fasteners are tightened properly and...

  • Page 19: Daay Power Sweep Assembly

    • Daay Power Sweep Setup Layout Di- agram for the length of sweep that is being assembled. • Daay Power Sweep Parts List for the length of sweep that is being assem- bled. • Section Joint with Jacks Assembly parts list and diagram.

  • Page 20: Paddle Chain Installation

    This will cause assembly problems later while trying to pull the chain thru the sweep hous- ing. • If installing the Daay Power Sweep in a bin that is not been completely cleaned out yet, minimize the amount of grain under the sweep.
  • Page 21 II. Bins that have the Grain sucked down to the sump and needs to be cleaned out with a sweep. 1. Position the paddle chain in front of the Daay Power Sweep. 2. Unroll the chain. 3. Tie a piece of wire to the end of the chain.

  • Page 22: Pivot Kit Assembly

    Eccentric Locking Collar Installation • Bearing Slide Plate Orientation NOTES: • Position the Daay Power Sweep so that the Drive End Section will not hit any obstruc- tions when it goes around the bin. Ladder and door frames are the most •...
  • Page 23 12. Adjust the Pivot Joint Assembly so that it is 7. Connect the bottom part of the Pivot Joint As- parallel with the Daay Power Sweep. sembly to the Pivot Bracket. 13. Install the eccentric lock collars for both the The bearing will rotate inside the large upper and lower bearings.

  • Page 24: Paddle Chain Tightening

    SECTION 3 - INSTALLATION PADDLE CHAIN TIGHTENING Paddle Chain Tightening: 1. Start by loosening the nuts on both of the shaft bearings. 2. Adjust the nuts on the paddle chain tightener wldt. Keep the shaft as perpendicular • as possible to the chain by giv- ing both sides a couple turns at a time, switching between the two.

  • Page 25: Bearing Slide Plate Orientation

    SECTION 3 - INSTALLATION BEARING SLIDE PLATE ORIENTATION position. Bearing Slide Plate Orientation: 3. Remove the 4 nuts and bolts holding on the Reference the following parts of this Bearing Slide Plate. manual. See Table of Contents for specific page 4.
  • Page 27 SECTION 3 - SETUP DAAY BIN PADDLE SWEEP Chain Tension instructions: Chain tightness To properly check the tightness of the chain, first remove the power source. Once the grain sweep’s power source has been removed you will use a stick to push up on the inner chain link bars between two paddles to check for the proper chain ten- sion, shown in below diagrams.

  • Page 28: Eccentric Locking Collar Installation

    SECTION 3 - INSTALLATION ECCENTRIC LOCKING COLLAR INSTALLATION ECCENTRIC LOCKING COL- LAR INSTALLATION INSTRUC- TIONS: 1. Ensure that the shaft is clean, free from nicks and burrs, straight and of proper diameter. The housed unit should not be mount- • ed on a worn section of the shaft.

  • Page 29: Track Pathway Installation

    SECTION 3 - SETUP TRACK PATHWAY INSTALLATION Track radius 3-14...
  • Page 30 SECTION 3 - SETUP TRACK PATHWAY INSTALLATION Detail A Alignment/ locating hole 3/16” Rivet (2 required at each connection Outer location Inner location Ref. Aeration floor planks Track pathway section Step 1. Measure the radius length from the center pivot of the sweep to the sweep wheel/caster which is to be supported.

  • Page 31: Section 4 - Operation

    SECTION 4 - OPERATION DAAY POWER SWEEP floor. The Drive Wheel should be slightly off the OPERATION: floor (if it is touching the floor, it will advance the Once the initial installation and setup have been sweep during startup and damage the Jacks). The completed we are ready to engage the sweep.

  • Page 32: Section 5 - Service

    SECTION 5 - SERVICE GENERAL INFORMATION • Grease fittings before each use. • Periodically check all bolts for looseness and re-torque if necessary. • Check paddle chain & drive chains for looseness and tighten as necessary. • Check oil level in gearboxes. If low use specified oil listed below or equivalent for proper gearbox.
  • Page 33 SECTION 5 - SERVICE This Page Left Blank...
  • Page 34 SECTION 6 - DIAGRAM & PARTS LIST 7’ DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 15’ BIN...
  • Page 35 SECTION 6 - DIAGRAM & PARTS LIST 7’ DAAY POWER SWEEP PARTS LIST FOR A 15’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT 688594 JACK - 5K PRO-SERIES 687931...
  • Page 36 SECTION 6 - DIAGRAM & PARTS LIST 8’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 18’ BIN...
  • Page 37 SECTION 6 - DIAGRAM & PARTS LIST 8’ 6” DAAY POWER SWEEP PARTS LIST FOR A 18’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT...
  • Page 38 SECTION 6 - DIAGRAM & PARTS LIST 10’ DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 21’ BIN...
  • Page 39 SECTION 6 - DIAGRAM & PARTS LIST 10’ DAAY POWER SWEEP PARTS LIST FOR A 21’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT 688594...
  • Page 40 SECTION 6 - DIAGRAM & PARTS LIST 11’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 24’ BIN...
  • Page 41 SECTION 6 - DIAGRAM & PARTS LIST 11’ 6” DAAY POWER SWEEP PARTS LIST FOR A 24’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT...
  • Page 42 SECTION 6 - DIAGRAM & PARTS LIST 13’ DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 27’ BIN...
  • Page 43 SECTION 6 - DIAGRAM & PARTS LIST 13’ DAAY POWER SWEEP PARTS LIST FOR A 27’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY...
  • Page 44 SECTION 6 - DIAGRAM & PARTS LIST 14’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 30’ BIN 6-11...
  • Page 45 SECTION 6 - DIAGRAM & PARTS LIST 14’ 6” DAAY POWER SWEEP PARTS LIST FOR A 30’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY...
  • Page 46 SECTION 6 - DIAGRAM & PARTS LIST 16’ DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 33’ BIN 6-13...
  • Page 47 SECTION 6 - DIAGRAM & PARTS LIST 16’ DAAY POWER SWEEP PARTS LIST FOR A 33’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT 688594...
  • Page 48 SECTION 6 - DIAGRAM & PARTS LIST 17’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 36’ BIN 6-15...
  • Page 49 SECTION 6 - DIAGRAM & PARTS LIST 17’ 6” DAAY POWER SWEEP PARTS LIST FOR A 36’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY...
  • Page 50 SECTION 6 - DIAGRAM & PARTS LIST 20’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 42’ BIN 6-17...
  • Page 51 SECTION 6 - DIAGRAM & PARTS LIST 20’ 6” DAAY POWER SWEEP PARTS LIST FOR A 42’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT...
  • Page 52 SECTION 6 - DIAGRAM & PARTS LIST 23’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 48’ BIN 6-19...
  • Page 53 SECTION 6 - DIAGRAM & PARTS LIST 23’ 6” DAAY POWER SWEEP PARTS LIST FOR A 48’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY...
  • Page 54 SECTION 6 - DIAGRAM & PARTS LIST 26’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 54’ BIN 6-21...
  • Page 55 SECTION 6 - DIAGRAM & PARTS LIST 26’ 6” DAAY POWER SWEEP PARTS LIST FOR A 54’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704801 ASSY 1' 6" SECTION 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY...
  • Page 56 SECTION 6 - DIAGRAM & PARTS LIST 29’ 6” DAAY POWER SWEEP SETUP LAYOUT DIAGRAM FOR A 60’ BIN 6-23...
  • Page 57 SECTION 6 - DIAGRAM & PARTS LIST 29’ 6” DAAY POWER SWEEP PARTS LIST FOR A 60’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704803 ASSY 4' 6" SECTION 704804 DRIVE END ASSY 688940 JACK MOUNT WELDMENT...
  • Page 58 SECTION 6 - DIAGRAM & PARTS LIST 32’ 6” DAAY POWER SWEEP PARTS SETUP LAYOUT DIAGRAM FOR A 66’ BIN 6-25...
  • Page 59 SECTION 6 - DIAGRAM & PARTS LIST 32’ 6” DAAY POWER SWEEP PARTS LIST FOR A 66’ BIN ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 704803 ASSY 4' 6" SECTION 704801 ASSY 1' 6" SECTION 704804 DRIVE END ASSY...

  • Page 60: Pivot End Assembly Diagram

    SECTION 6 - DIAGRAM & PARTS LIST PIVOT END ASSEMBLY DIAGRAM 6-27...

  • Page 61: Pivot End Assembly Parts List

    SECTION 6 - DIAGRAM & PARTS LIST PIVOT END ASSEMBLY PARTS LIST ITEM NO. PART NUMBER DESCRIPTION 704800 PIVOT END ASSEMBLY 688914 STABALIZER LOCK ARM 704838 PIVOT END RUBBER PLATE 688936 PIVOT STABALIZER BUSHINGS 688970 STABILIZER WLDT 689823 PIVOT FRONT CASTER WHEEL ASSY 689824 PIVOT BACK CASTER WHEEL ASSY 689838...

  • Page 62: Drive End Assembly Diagram

    SECTION 6 - DIAGRAM & PARTS LIST DRIVE END ASSEMBLY DIAGRAM 6-29...

  • Page 63: Drive End Assembly Parts List

    SECTION 6 - DIAGRAM & PARTS LIST DRIVE END ASSEMBLY PARTS LIST ITEM NO. PART NUMBER DESCRIPTION 688422 15 LINK CA550 CHAIN 688924 DRIVE GEARBOX BRACKET WLDT 688929 550 8 TOOTH WELD SPROCKET 688930 DRIVE CHAIN GUARD WLDT 688933 550 8 TOOTH WELD SPROCKET 689095 15' SEGMENTED WHEEL 689204...

  • Page 64: Section Joint With Jacks Assembly Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST SECTION JOINT WITH JACKS ASSEMBLY PARTS LIST & DIAGRAM ITEM NO. PART NUMBER DESCRIPTION 640030 SCREW - .375-16 X 1.00 GR 5 CAR 682413 NUT - .375 X 16 FLANGE 683942 SCREW - .375-16 X 0.75 GR 5 CAR 6-31...

  • Page 65: Section Joint Without Jacks Assembly Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST SECTION JOINT WITHOUT JACKS ASSEMBLY PARTS LIST & DIAGRAM ITEM NO. PART NUMBER DESCRIPTION 682413 NUT - .375 X 16 FLANGE 683942 SCREW - .375-16 X 0.75 GR 5 CAR 6-32...

  • Page 66: Daay Power Sweep Decal Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST DAAY POWER SWEEP DECAL PARTS LIST & DIAGRAM ITEM NO. PART NUMBER DESCRIPTION 666941 SERIAL NUMBER DECAL 686033 DECAL - DANGER 689872 DAAY POWER SWEEP DECAL 689873 PATENT NUMBER DECAL 686033 DECAL - DANGER...

  • Page 67: Bolt Bag Parts List

    SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 688429 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...
  • Page 68 SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 688430 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...

  • Page 69: Bolt Bag Parts List

    SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 688937 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...

  • Page 70: Bolt Bag Parts List

    SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 688972 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...

  • Page 71: Bolt Bag Parts List

    SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 689809 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...

  • Page 72: Bolt Bag Parts List

    SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 689822 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...

  • Page 73: Bolt Bag Parts List

    SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 689825 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...
  • Page 74 SECTION 6 - DIAGRAM & PARTS LIST BOLT BAG PARTS LIST 689826 ITEM NO. PART NUMBER DESCRIPTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 640025 SCREW-.375-16 X .75 GR 5 HHC 640030 SCREW - .375-16 X 1.00 GR 5 CAR 640144 NUT - .75-10 GR 5 CENTER LOCK 640153...
  • Page 75 SECTION 6 - DIAGRAM & PARTS LIST PADDLE CHAIN PARTS LIST & DIAGRAM 686162 ITEM NO. PART NUMBER DESCRIPTION 686010 MALE CONNECTOR LINK 686081 RUBBER PADDLE 686111 PADDLE BACKING PLATE 688591 BULK CA550 CHAIN W/ F17 ATTACHEMTN EVERY 6TH 0.52 654121 3/8"...

  • Page 76: Paddle Chain Parts List

    SECTION 6 - DIAGRAM & PARTS LIST PADDLE CHAIN PARTS LIST 686220 ITEM NO. PART NUMBER DESCRIPTION 686010 MALE CONNECTOR LINK 686081 RUBBER PADDLE 686111 PADDLE BACKING PLATE 688591 BULK CA550 CHAIN W/ F17 ATTACHEMTN EVERY 6TH 0.639 654121 3/8" NYLON LOCKNUT 680140 3/8"...
  • Page 77 SECTION 6 - DIAGRAM & PARTS LIST PADDLE CHAIN PARTS LIST 688581 ITEM NO. PART NUMBER DESCRIPTION 686010 MALE CONNECTOR LINK 686081 RUBBER PADDLE 686111 PADDLE BACKING PLATE 688591 BULK CA550 CHAIN W/ F17 ATTACHEMTN EVERY 6TH 1.054 654121 3/8" NYLON LOCKNUT 680140 3/8"...

  • Page 78: Paddle Chain Parts List

    SECTION 6 - DIAGRAM & PARTS LIST PADDLE CHAIN PARTS LIST 688585 ITEM NO. PART NUMBER DESCRIPTION 686010 MALE CONNECTOR LINK 686081 RUBBER PADDLE 686111 PADDLE BACKING PLATE 688591 BULK CA550 CHAIN W/ F17 ATTACHEMTN EVERY 6TH 0.822 654121 3/8" NYLON LOCKNUT 680140 3/8"...

  • Page 79: Paddle Chain Parts List

    SECTION 6 - DIAGRAM & PARTS LIST PADDLE CHAIN PARTS LIST 689868 ITEM NO. PART NUMBER DESCRIPTION 686010 MALE CONNECTOR LINK 686081 RUBBER PADDLE 686111 PADDLE BACKING PLATE 688591 BULK CA550 CHAIN W/ F17 ATTACHEMTN EVERY 6TH 1.178 654121 3/8" NYLON LOCKNUT 680140 3/8"...

  • Page 80: Pivot End Sub Assembly Diagram

    SECTION 6 - DIAGRAM & PARTS LIST PIVOT END SUB ASSEMBLY DIAGRAM (704800) 6-47...

  • Page 81: Pivot End Sub Assembly Parts List

    SECTION 6 - DIAGRAM & PARTS LIST PIVOT END SUB ASSEMBLY PARTS LIST (704800) ITEM NO. PART NUMBER DESCRIPTION 688920 PIVOT END WLDT 688922 PADDLE CHAIN TIGHTNER WLDT 688942 BEARING SLIDE PLATE 704836 DRAG COVER PLATE - PIVOT END 688954 RUBBER DRAG - PIVOT END 704837 PIVOT END CAP...

  • Page 82: 4'6" Section Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST 4’6” SECTION PARTS LIST & DIAGRAM (704803) ITEM NO. PART NUMBER DESCRIPTION 704822 4' 6" SINGLE COVER 704825 4' 6" SINGLE DIVIDER PLATE 688948 RUBBER DRAG - 4' 6" SECTION 704828 DRAG COVER PLATE - 4' 6" SECTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 682524...

  • Page 83: 1'6" Section Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST 1’6” SECTION PARTS LIST & DIAGRAM (704801) ITEM NO. PART NUMBER DESCRIPTION 704820 1' 6" SINGLE COVER 704823 1' 6" DIVIDER PLATE DIVIDER 688947 RUBBER DRAG - 1' 6" SECTION 704826 DRAG COVER PLATE - 1' 6" SECTION 640018 SCREW - .3125 X 1.00 GR 5 CAR 682524...

  • Page 84: Drive End Sub Assembly Diagram

    SECTION 6 - DIAGRAM & PARTS LIST DRIVE END SUB ASSEMBLY DIAGRAM (704804) 6-51...

  • Page 85: Drive End Sub Assembly Parts List

    SECTION 6 - DIAGRAM & PARTS LIST DRIVE END SUB ASSEMBLY PARTS LIST (704804) ITEM NO. PART NUMBER DESCRIPTION 704831 DRAG COVER PLATE - DRIVE SECTION 704830 DRIVE END DIVIDER PLATE 704832 DRIVE END COVER PLATE 704829 DRIVE END COVER 688962 RUBBER DRAG - DRIVE SECTION 688963...

  • Page 86: Front Caster Wheel Assembly Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST FRONT CASTER WHEEL ASSEMBLY PARTS LIST & DIAGRAM (688823) ITEM NO. PART NUMBER DESCRIPTION 688969 CASTER PLATE 688971 FRONT CASTER PLATE - PIVOT SECTION 688997 GLASS FILLED NYLON WHEEL 640067 SCREW-.50-13 X 3.50 GR 5 HHC 660638 NUT - .500 - 13 GR 2 LOCK NYLON INSERT 680140...

  • Page 87: Rear Caster Wheel Assembly Parts List & Diagram

    SECTION 6 - DIAGRAM & PARTS LIST REAR CASTER WHEEL ASSEMBLY PARTS LIST & DIAGRAM (688824) ITEM NO. PART NUMBER DESCRIPTION 688968 BACK CASTER PLATE - PIVOT SECTION 688969 CASTER PLATE 688997 GLASS FILLED NYLON WHEEL 640067 SCREW-.50-13 X 3.50 GR 5 HHC 660638 NUT - .500 - 13 GR 2 LOCK NYLON INSERT 680140...

  • Page 88: Pivot Kit Diagram

    SECTION 6 - DIAGRAM & PARTS LIST PIVOT KIT DIAGRAM 6-55...

  • Page 89: Pivot Kit Parts List

    SECTION 6 - DIAGRAM & PARTS LIST PIVOT KIT PARTS LIST ITEM NO. PART NUMBER DESCRIPTION 689836 BOLT BAG - PIVOT 3/8" GEAR BOX BOLTS 79142 SCREW - .375 - 16 X 1.00 GR5 HHT 640153 WASHER - 3/8" SPRING LOCK 640154 WASHER - 3/8"...
  • Page 90 SECTION 6 - DIAGRAM & PARTS LIST PIVOT KIT PARTS LIST CONT PART NUM- ITEM NO. DESCRIPTION 688912 UPPER PIVOT CHAIN GUARD UPPER PLATE 688913 STABALIZER PIN 689805 PIVOT JOINT ROUND COVER PLATE 689810 1 1/4" BEARING W/ 3 BOLT FLANGETTES 689871 DANGER DECAL 689851...
  • Page 91 SECTION 6 - DIAGRAM & PARTS LIST This Page Left Blank 6-58...
  • Page 92 SECTION 6 - DIAGRAM & PARTS LIST PIVOT JOINT (689851, 689852 & 689833) DIAGRAM 6-59...
  • Page 93 SECTION 6 - DIAGRAM & PARTS LIST PIVOT JOINT (689851, 689852 & 689833) PARTS LIST ITEM NO. PART NUMBER DESCRIPTION 688889 UPPER PIVOT ARM WLDT 689800 LOWER PIVOT ARM WLDT 689802 PIVOT CHAIN TIGHTNER 689805 PIVOT JOINT ROUND COVER PLATE 689806 PIVOT JOINT OBLONG COVER PLATE 689808...

  • Page 94: Limited Warranty

    SECTION 7 - LIMITED WARRANTY...

Table of Contents