LED Lighting XSY-AL Series Installation Instruction

LED PARKING LOT LIGHT Installation Instruction

Parameter

1. Product model：see the product label for the product model



RR=The input voltage HV=200-480V, without HV=120-347V.
YYY=Optical Angle III=Type III
R can be"S"or"E"or"M"or"F",S=Slip Fitter Arm,E=Extruded Arm,M=Surface mounting Arm,F=Slip Fitter+Extruded Arm；
2. Product power：80W、 100W、150W、250W、320W, See the product label for product power.
3. input voltage：120-347VAC or 200-480VAC, See the product label for product input voltage.
4. Product size（Does not contain lamp arm）：80W/100W/150W -353*270*60 mm、 250W/320W -520*320*62.5mm；
5. product weight（Does not contain lamp arm）：80W/100W/150W - 3.85kg、250W/320W
- 7.3kg；
6. Ambient temperature：-25℃-+45℃
7. Protection level：IP65 Or wet conditions
8. Product life warranty is 5 years
9. Humidity：≤95%.
10. Air Pressure：90-106 Kpa

Application

Widely used in outdoor parking, road lighting.

Notes before Installation

1. Be careful to open the carton, contact us if any damage.
2. This product must be installed in accordance with the applicable installation, code by a person familiar with the construction and
operation of the product and the hazards involved.
3. "caution - risk of shock" and "disconnect power before servicing" when photoelectric switch provided.
4. Please check whether the voltage marked on the luminaire is consistent with the input voltage to be connected, so as not to
damage the LED luminaire.
5. To ensure the lifetime of the product, please do not use it in a place with strong acid mist.
6. Make sure the installation position can withstand 10 times the weight of the luminaire before installation and install it at a flat place
without vibration, no swing, no fire hazard.
Package
1. LED Parking lot light.
2. Installation Instruction.
3. Built-in fittings,
Follow up customer
request is optional
Description induction module
V=Type V .
Z can be "D" and "N", "D"=with sensor , "N"=without sensor .
Slip Fi er
M6Screw
M8Screw
(2PCS)
(4PCS)
Photocell/Non-Photocell Removable, Twist Lock for them
Please read this manual carefully before using the product
XSY-ALRRMMMW-XXK-YYY-ZR
MMMW=Actual declared power.
+
Slip Fi er
Extruded Arm
Extruded Arm
M6Screw
M6Screw
M10Screw
(2PCS)
(2PCS)
(2PCS)
Shorting cap
Photocell
-1-
XXK=CCT 40K=4000K, 50K=5000K, 57K=5700K.
Surface moun ng
M6Screw M8Screw
M10Screw
(2PCS) (2PCS) (2PCS)
(2PCS)
(2PCS)
Flat mat
Spring mat