Hamilton Beach Smart Chop 72950 Manual page 9

Troubleshooting
Food is chopped too coarsely.
• For fine chopping and pureeing, assemble chopper without
Smart Chop
TM
Pulse until desired consistency is reached.
Chopper will not turn on.
• Check to make sure chopper is properly assembled. See
page 5 or 6.
Chopper shuts off during use and will not turn back on.
• This chopper is equipped with motor overload protection
to prevent product damage due to overheating. To reset,
unplug chopper and allow to cool for 15 minutes. Plug in
and continue chopping.
S-blade does not rotate when motor is activated.
• Check to make sure S-blade is fully seated on drive shaft.
With unit unplugged, spin blade on shaft by hand until it
falls into place (you will feel a slight resistance to spinning
motion).
(cont.)
attachment, placing S-blade in clear bowl.
9