How To Clean; Troubleshooting - Hamilton Beach Smart Chop 72950 Manual

How to Clean

Electrical Shock Hazard.
w WARNING
Unplug unit before cleaning. Do not immerse base, plug, or
cord in water or other liquid.
Unplug.
1.
Wash all removable parts in hot, soapy water or in top rack
2.
of dishwasher. Use spatula/cleaning brush if needed. Blade
is sharp; handle carefully. Rinse and dry.
Reassemble for safe storage.
3.
To clean base, wipe with a damp cloth. Do not use
4.
abrasive cleaners. Do not immerse base in water.

Troubleshooting

Food is spinning in attachment but not chopping.
• Cut food into 1.5" (3.8-cm) or less pieces that are small
enough to fall freely between S-blade hub and sides of
attachment.
Food gets stuck in holes of attachment.
• Food may be too wet. Dry food thoroughly with paper towels
before placing in chopper.
• Foods with high moisture content, like onions and peppers,
may stick to sides of attachment. This is normal. Simply
remove attachment from bowl, turn upside down, and tap
gently on cutting board or plate to dislodge food. You may
also use included spatula/cleaning brush to remove food
from sides of attachment or bowl.
8