Advertisement
Installation manual for:
Mazda 5 2005 -->
Use this hole
Use this hole
2-DIN
Installation kit includes the following items:
* 1X 2-ISO 100 mm. metal bracket
* 1X Radio trim
* 1X Replacement panel
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
* 2X Cushion
* Mount the plates.
CAW-1170-05
Kenwood DDX6029
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 7 & 9 marked with an arrow.
Measured from left to right.
Kenwood DDX 7025
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.
Advertisement
Table of Contents
Related Manuals for Kenwood CAW-1170-05
Summary of Contents for Kenwood CAW-1170-05
- Page 1 Use position 1 marked with a cross. Use this hole Use position 7 & 9 marked with an arrow. Measured from left to right. Kenwood DDX 7025 We advice to use the following positions. Other positions are also possible. Use position 1 marked with a cross.
- Page 2 2-DIN CAW-1170-05 Remove the screw at the location of the Remove the panel around the gear lever. arrow. Remove the screws behind the panel Remove the original radio panel. shown in 3A. This should be removed on the passenger and driver side. Remove the panel.
Need help?
Do you have a question about the CAW-1170-05 and is the answer not in the manual?
Questions and answers