Stainless Steel Surfaces; Some Models; Cleaning Stainless Steel Surfaces - Whirlpool GLT3014G Use And Care Manual

C a r i n g F o r Yo u r C o o k t o p
Cleaning chart
PART
Surface burner grates and caps*
•
Light to moderate soil
• Heavy burned on soils
Surface burners

Stainless steel surfaces

Cleaning Stainless Steel Surfaces

•
Do not use steel wool or soap-filled scouring pads
•
Rub in the direction of the grain line to avoid
marring surface
•
Always wipe dry to avoid water marks
Routine cleaning
and fingerprints
Stubborn stains and
baked-on residue
Hard water spots
10
(cont.)
CLEANING METHOD
•
Soap and water
•
Non-abrasive plastic scrubbing pad
• Dishwasher (grates only)
• Non-abrasive plastic scrubbing pad
• Mild abrasive powdered cleanser
and water
CLEANING AGENT
• Liquid detergent and water; all-
purpose cleaner
• Mild-abrasive cleanser or stainless
steel cleaners
• Vinegar
SPECIAL INSTRUCTIONS
•
Clean as soon as they become
dirty.
•
Wash, rinse and dry well.
•
Repeat steps of cleaning process
(with items at left) as needed,
until soil is completely removed.
•
Rinse thoroughly and dry.
•
NOTE: Do not reassemble caps
on burners while wet. Do not
wash caps in dishwasher.
• See "Sealed surface burners and
cooktop" in the "Caring for your
cooktop" section.

(some models)

•
If commercial cleaners are used, follow label
directions. If product contains chlorine
(bleach), rinse thoroughly and dry with a soft,
lint-free cloth. Chlorine is a corrosive sub-
stance.
HOW TO USE
• Wipe with damp cloth or sponge, then rinse
with clean water and wipe dry.
• Rub in the direction of the grain lines with a
damp cloth or sponge and cleaner. Rinse
thoroughly. Repeat if necessary.
• Swab or wipe with cloth. Rinse with water and
dry.