Panasonic FZ-X1AFAB Supplementary Instructions Manual page 6

5. The checking and maintenance of the product.
May result in explosion or fire.
DO NOT repair or disassemble this product.
DO NOT take this product into hazardous area if a
problem is found.
Before taking this product into hazardous area,
follow the inspection procedures described below.
• The enclosure including display shall be checked
for damages.
• Make sure that there is no damage, crack, wear
and tear in all connector covers and gasket.
• Make sure no screws are missing.
• Make sure that there are no holes or damage in
the leather case.
• Make sure that the caution labels in this product
and leather case are not peeled off.
• Turn on this product and make sure that there is
no spark, smoke, smell, strange noise.
• Make sure that there is no other damage, wear
and tear or operational malfunctioning.
• Make sure all connector covers are closed.
• Make sure the interface cover and the battery
cover are locked.
• Before any use, the display and all the jack and
port covers shall be checked for damages and be
closed.
Contact your technical support. Please refer the
Operating Instructions.
6
WARNING