Installation Preparation - H3C S7500 Series Installation Manual

Installation Manual
H3C S7500 Series Ethernet Switches
B.1.3 Installation Preparation
Follow the given steps to do the installation preparation:
1) Draw lines correctly to avoid rework.
2) Unpack the cabinet and the cabinet accessories according to the operation guide.
Caution:
If you need to install feet for the cabinet on cement floor, refer to Installing Cabinet
Accessories". Then proceed with step 3.
After installing feet, you must fix the cabinets to avoid accidents.
You can use supports to install cabinets on antistatic floor. You do not need to install
feet.
Note:
The way of fixing the cabinet with feet is not recommended.
3) Put the rack in the upright position, and then remove wood boards and support
wood bars from the back with a cross-head screwdriver. Put the removed boards
and bars in a safe place to avoid injury. Keep the removed screws for later use.
Appendix B N68 Cabinet Installation
B-3