Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for baby exo Smart Formula Maker
- Page 2 Removable powder box Control panel Removable water tank Removable funnel Adjustable tray ON/OFF Specifications Product Baby EXO Formula Maker Powder capacity 300g Voltage 110V Water capacity 1800ml Frequency 60Hz Weight 2.75KG Working power 550W Size 180×300×370mm Standby power 1. Please read this manual carefully before you start to use it...
- Page 3 Powder cover Powder turnable Water tank cover Stator When installing, the milk powder box must be aligned with the rails on the main unit. Powder feeding carousel Removable Milk powder box water tank Upper part of the funnel Install the powder feeding carousel 1.Pay attention to the buckle of the lid and the powder box, screw it clockwise Lower part of the funnel...
- Page 4 1.Intall the boiler cover 1.combine the upper and lower parts first 2.mixing chamber is docked with the fuselage Install the boiler cover. After installation, firmly press down on the boiler cover. 2.Put on the water tank Install the water tank. Secure the water tank in the card slot of the machine to stabilize the water tank.
- Page 5 Milking water temperature Water volume Milking indicator Water level warning light Milk bottle warning light High temperature Powder box warning light Cleaning indicator Warm water drinking Funnel warning light indicator Motor warning light Temperature warning light Warning light description When the water level warning light is on, there is no water in the boiler.
- Page 6 Warm water drinking indicator Milking indicator Press the MENU button to switch to the warm water drinking mode. The warm water drinking indicator lights up to indicate successful switching of the warm water drinking mode. In the warm water drinking mode, the warm water drinking indicator flashes to indicate that the water is heating.Click the button to adjust the amount of water, The machine defaults brewing milk mode,and the milking indicator light flashs means...
- Page 7 Please clean and dry the following parts before use. （Warning: powder box, lunch box cover, water tank, water tank cover, adjustment tray, water tray prohibit steam sterilization of high temperature water boiler to prevent deformation. Please use 122-158℉ warm water for cleaning and disinfection, dry and use.） Press the MENU button four time to the formula setting function(C2 Mode).Set the formula concentration according to your formula powder.This numerical value means the powder weight/1oz(or 30ml)water.Click the...
- Page 8 Press the menu button ,set the water Clean the funnel(clean every day) Clean the Powder box ,concentration as you want and the temperature to 113℉ Turn on the switch, wait until the milk indicator light is on, indicating that the heating is complete, you can use Please remove and clean the powder box Please remove the funnel for cleaning...
- Page 9 1.Add the water to the tank,add the powder into the powder box and turn on the 1. Please read the instructions carefully before use. machine. 2. This instruction manual contains important information and should not be 2.Press the menu button and set the water as you want and the temperature to 113℉ discarded.
- Page 10 6. Do not plug or unplug the power supply directly with wet hands, which may cause electric shock or personal injury. Q1:The display shows «E05» 7. Do not allow the body to get in or spray on the water to prevent foreign matter and water from entering the ON/OFF button.
- Page 11 If you have any questions about our product,Please feel Q6.The cleaning of funnel and powder box free to contact us(customerservice@babyexo.com),or We will advice you clean the funnel everyday and clean the powder check www.babyexo.com.Our customer service would box every time before you re-full it. solve your problem in 24 hours.