Philips HD9361 User Manual page 13

All the program LEDs light up and
•
the LED of "keep warm" program is
selected by default.
8
Press program navigation button
(< or >) to select a program.
When a program is selected,
•
the LED of this program will be
highlighted.
See "Preset programs" for details.
•
9
Press the OK button
program.
The appliance starts processing.
•
The LED of the selected program
•
keeps lighting up until processing is
completed.
When processing is complete, the
•
appliance will beep.
10
Press the On/Off button
power off the appliance.
The appliance will automatically
•
go into "keep warm" mode after
Congee, Nutritious soup, Fruit
flower tea, or low temperature brew
program is completed. It will keep
warm for 30 minutes and then
power off automatically.
11
Unplug the appliance and remove
the kettle from the base.
12
Remove the lid.
13
Remove the tea basket holder.
14
Pour out the water/ingredients/soup
from the kettle carefully.
5 Use your tea
basket (Fig. 3)
Follow the steps in Fig. 3 to assemble
and use your tea Basket
For preset programs, see "Preset
programs".
Note: Never fill the kettle beyond the
maximum level indication for tea.
6
Follow the steps in Fig. 4 to assemble
and use your stewing pot.
For preset programs, see "Preset
programs".
Note: Never fill the kettle beyond the
maximum level indication for stewing
to start the
pot.
7
Always unplug the base before you
clean it
Never immerse the kettle or its base in
to
water.
Clean the kettle thoroughly each time
after use. Use water and cleaning
detergent together with a soft cloth for
best results.
Make sure to dry the product properly
before putting it away in storage.
Clean the nourishing
kettle and the power
base
Clean the outside of the kettle and the
base with a moistened soft cloth.
Caution: Do not let the moist cloth
come into contact with the cord, the
plug and the connector of the base.
Use your stewing
pot (Fig. 4)
Cleaning
EN 19