Specifications; Getting Started - TC Electronic CLARITY M Quick Start Manual

20 CLARITY M/CLARITY M STEREO
CLARITY M/CLARITY M STEREO Getting started
Mount the included stand:

Getting Started

• •
that hold the stand flat against
the back of the unit. The screws
are designed to be operated with
a 2.5 mm hex key, but you can also
use a T10 Torx driver or a 3/32 SAE
hex key if care is taken not to strip
the screw.
• Flip the stand around so that it
sticks outward from the unit. The
stand has rubber pads to prevent it
from scratching the surface where
it is placed.
• Replace the screws into the same
holes to secure the stand.
Connect the unit to AC power.
Use a standard TOS cable (not
included) to connect an
external digital audio device.
Use the SUB-D-15 cable
(included) to connect an
external digital audio device.
Hold the far right button to
switch the unit on.
Remove the 2 hex screws
Plug-in Metering
a. Download the Clarity M
plug-in installer from
tcelectronic.com/clarity-m/
support.
b. Follow the installation instructions.
c. Connect the unit to your computer
via USB.
d. In your DAW software, insert the
Clarity M plug-in at the place you
wish to monitor.
This can be a normal track, a bus,
an aux-bus or a master output.
e. In Clarity M, go to the System (SYS)
menu and set USB Mode to "Plug-in".
In the unit, use the System
menu > Inputs to select the
appropriate input.
Use System > Preset Folder to
set your region for appropriate
loudness standards.
Use Library (Lib) to select an
appropriate preset and press
EXIT.
Use the RTA/RADAR/VSCOPE
switch to toggle between
Radar, RTA and Vector Scope.
Note – a full manual is available as
a PDF download at tcelectronic.com/
clarity-m/support

Specifications

CLARITY M
Connections
Input 1 – BNC (AES3id, S/PDIF)
Input 2 – BNC (AES3id, S/PDIF)
Digital audio inputs
Input 3 – BNC (AES3id, S/PDIF)
Input 4 – TOSLINK (EIAJ optical)
2 external switch inputs, 1 relay output
(100 mA max, optically isolated)
GPIO
1⁄8" mono female (GPO)
¼" stereo female (2x GPI)
USB USB 2.0 (Micro type B)
Display and Controls
User controls Rotary encoder, 6 selection buttons
Display 7" TFT color 800 x 480
Power
Power Consumption 12 V DC, 0.5 A
Physical
Dimensions (H x W x D) 140 x 182 x 38 mm (5.5 x 7.2 x 1.5")
Weight 1.2 kg (2.6 lbs)
Accessories
2.5 mm HEX key
AC adapter
DB15 cable assembly
Included Accessories
BNC female to RCA male adapter
USB cable type A male to micro B male,
1 m long
Compliance
Compliance with all worldwide standards
ITU BS.1770-4, ATSC A/85, EBU R128,
TR-B32 and OP-59
Quick Start Guide 21
CLARITY M STEREO
Input 1 – BNC (AES3id, S/PDIF)
Input 2 – TOSLINK (EIAJ optical)
2 external switch inputs, 1 relay output
(100 mA max, optically isolated)
1⁄8" mono female (GPO)
¼" stereo female (2x GPI)
USB 2.0 (Micro type B)
Rotary encoder, 6 selection buttons
7" TFT color 800 x 480
12 V DC, 0.5 A
140 x 182 x 38 mm (5.5 x 7.2 x 1.5")
1.2 kg (2.6 lbs)
2.5 mm HEX key
AC adapter
DB15 cable assembly
BNC female to RCA male adapter,
BNC female to XLR female adapter
USB cable type A male to micro B male,
1 m long
Compliance with all worldwide standards
ITU BS.1770-4, ATSC A/85, EBU R128,
TR-B32 and OP-59